testing the ALCL. poor cold start running - ZR-1 Net Registry Forums

Karl · 05-11-2014

What are the pins and their location on the ALCL to test for trouble codes? I am referring to the paper clip method. If I remember correctly they are the slots in the upper right corner but I am may be wrong.

I started my z yesterday and not more than 100 feet later the car began to stumble and almost cut off. After warming up it went away and began to drive fine except for a slight bog in 2nd gear under load.

The car has about 68K on the clock and there seem to be a lot of original parts on the car. I have replaced the coils and wires. The prior owner installed new FIC injectors that are ethanol compliant.

Thanks ahead of time!

05-11-2014	#1
Karl Join Date: May 2013 Location: Chicago Posts: 982	testing the ALCL. poor cold start running What are the pins and their location on the ALCL to test for trouble codes? I am referring to the paper clip method. If I remember correctly they are the slots in the upper right corner but I am may be wrong. I started my z yesterday and not more than 100 feet later the car began to stumble and almost cut off. After warming up it went away and began to drive fine except for a slight bog in 2nd gear under load. The car has about 68K on the clock and there seem to be a lot of original parts on the car. I have replaced the coils and wires. The prior owner installed new FIC injectors that are ethanol compliant. Thanks ahead of time! Last edited by Karl; 05-11-2014 at 09:43 PM.