Easy installation of LT5 Serpentine Belt - ZR-1 Net Registry Forums

Leempoels · 03-04-2016

An effortless installation of the OEM GM 10067477 / 6PK2037 Serpentine Belt on the LT5
Remove air duct.
With the tensioner rotated, route the belt around the pulleys having it first behind the water pump pulley on the driver side. Then pass a thin nylon rope behind the belt between the generator pulley and the water pump pulley. Pull both ends of the rope from the driver side around the water pump pulley, the belt will easily go around that pulley. Remove the rope and release the tensioner.

Belt over WPP.JPG

03-04-2016	#1
Leempoels Join Date: Feb 2013 Location: France Posts: 8	Easy installation of LT5 Serpentine Belt An effortless installation of the OEM GM 10067477 / 6PK2037 Serpentine Belt on the LT5 Remove air duct. With the tensioner rotated, route the belt around the pulleys having it first behind the water pump pulley on the driver side. Then pass a thin nylon rope behind the belt between the generator pulley and the water pump pulley. Pull both ends of the rope from the driver side around the water pump pulley, the belt will easily go around that pulley. Remove the rope and release the tensioner. Belt over WPP.JPG Last edited by Leempoels; 03-05-2016 at 09:50 AM.