Idle concerns - ZR-1 Net Registry Forums

Jim Nolan · 11-30-2009

With the cams reset after full porting will there be a lope in idle? The RPM is about 900. The second issue is when I get on it there seems to be little difference with key on or off, RC injectors installed 2 years ago. I am debating wether to pull the plenum off and check the secondary advance. I put a vacuum gage on with engine running and it holds about 23 hg. SW headers also. Any thoughts.

11-30-2009	#1
Jim Nolan Join Date: Jan 2007 Location: Florida Posts: 240	Idle concerns With the cams reset after full porting will there be a lope in idle? The RPM is about 900. The second issue is when I get on it there seems to be little difference with key on or off, RC injectors installed 2 years ago. I am debating wether to pull the plenum off and check the secondary advance. I put a vacuum gage on with engine running and it holds about 23 hg. SW headers also. Any thoughts. Last edited by Jim Nolan; 11-30-2009 at 01:51 PM.