Update on my hi-miler Z project - ZR-1 Net Registry Forums

VetteMed · 04-07-2011

Well, the SRC light went off the next time I started the engine. The codes pulled were:

13
22
21
33

So I'm confused... This points to LR and RR, and LF issues. Since I've swapped the LR assembly with the RR assembly, it seems to me that perhaps this could be related to the controller or wiring. However, since the light went off, and I know some folks have had success just clearing the codes over and over again, perhaps that will be effective in my case.

04-07-2011	#11
VetteMed Join Date: Mar 2009 Location: Orlando, FL Posts: 1,816	Re: Update on my hi-miler Z project Well, the SRC light went off the next time I started the engine. The codes pulled were: 13 22 21 33 So I'm confused... This points to LR and RR, and LF issues. Since I've swapped the LR assembly with the RR assembly, it seems to me that perhaps this could be related to the controller or wiring. However, since the light went off, and I know some folks have had success just clearing the codes over and over again, perhaps that will be effective in my case.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode