How-to Swap the Motor Mounts?

[Ccmano]

Originally Posted by VetteMed

Update: After taking the car for a drive, the mount settled a little, leaving about 1/16" or so of clearance -- which was enough to make me notice just how much vibration was being transmitted through the car due to the interference. It's much quieter and smoother now.

Cool, my mounts are on their way... now I just need some time to install them.
H

[Ccmano]

BTW Andrew... did you have to remove or at least loosen the C-Beam?
H

[VetteMed]

Originally Posted by Ccmano

BTW Andrew... did you have to remove or at least loosen the C-Beam?
H

When I initially did the job, yes, I removed the headers, h-pipe, and the rest of the exhaust, and removed the c-beam so that I could have as much freedom as possible to jack up the motor. When I later shimmed the driver's side mount, I did not have to re-loosen the C-beam.