|
|
|
09-29-2011
|
#1 |
 
Join Date: Jul 2007
Location: Bartlett, IL
Posts: 7,168
|
Re: Replaced my blower fan and now I'm getting serious!!
__________________
1990 Corvette ZR-1 #1051 Watson Headers (2" Primary) - Flowmaster Cats - Borla Catback Late Model IH - Plenum Coilovers - 4.10s Shelby Series 1 - Wilwood Brakes Custom Interior NCM Lifetime Member #978 |
|
|
|
09-29-2011
|
#2 |
|
Join Date: Jul 2011
Location: Homestead, Fl
Posts: 247
|
Re: Replaced my blower fan and now I'm getting serious!!
Jeff..are you Purplec4? If so, thank you so much for the inspiration to tackle this job. It was really a piece of cake with your pics and instructions.
Like I said in a previous post...my evap was so clogged I opted to punch through about 70% of the fins with a thin flat file and took out the screens on the opposite side. The result is a flow of air that is even better than my 96's was. I hope that other people who think their z's ac are just weak from the factory try this simple cure. Thanks again for the post!! |
|
|
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
