Minor rear hight adjustment how to please?

[petefias]

Originally Posted by jonszr1

t5hanx again for your help .got it dialed in. I put a floresent mark on the car on the spots where I measured. have to use a black light to find em , but don't have to measured. On the lowering I amgoing to wait till i get the whole kit . I am toying with just taking it to gulstrand. I hear he does quality work. I nhear the front spring can be a bear . What is a safe amt to lower the car? again thanx for all your help

It really is a question why you want to lower it. If you're after great handling you probably benefit more from coil-overs or at least harder springs, urethane bushings, revalved shocks. If you're after the looks than you can lower it as low as you can stand it (and not scrape on crossing yellow lines).

The front lowering with leaf spring requires the removal of the spring and it is not a 10 minute job. It is doable on jack stands but it will take time.

I think 1" lowering is a good compromise. More than that will make you scrape a lot. Some cars ride higher than others so on those you could lower a little more.