|
![]() |
#1 |
Join Date: Jul 2010
Location: Fairfax, VT
Posts: 203
|
![]()
Thanks everyone. All the responses were great. I will try them all.
I just put in a NOS TPS and it is set up to .54 v KOEO. Smooth idle but somewhat high. The idle is high, it is not just the tach reading. Thanks again Don ![]() |
![]() |
![]() |
![]() |
#2 | |
Join Date: May 2007
Location: Chicagoland, IL
Posts: 9,686
|
![]() Quote:
You need to set the Min Air first based on the IAC counts (10-20 at no load idle), THEN adjust the TPS voltage. |
|
![]() |
![]() |
![]() |
Thread Tools | |
Display Modes | |
|
|