|
|
|
05-08-2012
|
#1 |
 
Join Date: Dec 2004
Location: Jacksonville, FL USA
Posts: 4,609
|
Re: Almost BG bound-Need help AGAIN
I'm not sure but I think Pete had this product in mind.
 http://www.jegs.com/i/K%26amp%3BN/599/62-1300/10002/-1 I was thinking I might try two of these someday myself, and see what happens.  Tom
__________________
1990 ZR-1, Black/grey, #2233, stock. ZR-1 Net Reg Founding Member #316 & NCM member |
|
|
|
05-08-2012
|
#2 |
|
Join Date: Dec 2004
Location: Jacksonville, FL USA
Posts: 4,609
|
Re: Almost BG bound-Need help AGAIN
After further thought....I figure that I was looking at the wrong stuff!
I would buy two of these, take Marc's stuff and use it in place of the filter material that comes with these fuel filters. http://www.jegs.com/i/Spectre/865/2369/10002/-1 Tom
__________________
1990 ZR-1, Black/grey, #2233, stock. ZR-1 Net Reg Founding Member #316 & NCM member |
|
|
|
|
05-08-2012
|
#3 |
|
Join Date: Oct 2011
Location: STAFFORD VA,
Posts: 576
|
Re: Almost BG bound-Need help AGAIN
Guys!...great ideas,..but..where from the outlet of the cam cover to the airhorn are they going to fit??...I know from experience you cant even put a red/blue fitting on the cam cover outlet because of the clearance.
Purolator has material that designed for this(oil/air breathing),..its just a matter of putting it inline that is clean and unobtrusive... still working on the pcv/idle issue,..should have that ironed out today,..i am going to design something cool... AND I got my oil catch can! With that said,...I am humbled by the knowledge and the sheer willingness to help us in need,..and it really flows both ways,... 
|
|
|
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
