Plenum Pull Advice, Starter Rebuild, MAP Sensor Info

[scottfab]

Originally Posted by Dynomite

...snip...

Delete TB coolant and Plenum Pulls will even be simpler. See LT5 Eliminated Systems

...snip...

To keep the plenum from developing ice never bypass the TB.
Early engine development discovered in a catastrophic way
that ice can build then release into the heads. Depends on environmental conditions of course.

To "burp" the coolant simply leave the driver's side TB hose pointing up
as you fill the coolant reservoir. When you see a bit of coolant come out of the TB you're done. No blowing the LT5 needed.