Experimental Bling - ZR-1 Net Registry Forums

Dynomite · 05-10-2013

Billet Aluminum Ultra Light Belt Tensioner Pulley

Just experimenting with a Billet Aluminum High Speed bearing Belt Tensioner Pulley. You get a nice new Pulley Bearing and Pulley diameter is only 3/16 inch larger than stock otherwise Pulley dimensions are identical to stock. The larger diameter will move the belt tensioner counterclockwise at the bearing center only 3/32 inch more which is insignificant

To be installed and tested within a few days after I get Plenum back on my 90' (with some modifications to IH and Plenum of course

)

Belt Tensioner Billet Aluminum Ultra Light Pulley

See item #9c of Bling (Carter and Others)

05-10-2013	#1
Dynomite Join Date: Aug 2009 Location: South Dakota/California Posts: 3,817	Experimental Bling Billet Aluminum Ultra Light Belt Tensioner Pulley Just experimenting with a Billet Aluminum High Speed bearing Belt Tensioner Pulley. You get a nice new Pulley Bearing and Pulley diameter is only 3/16 inch larger than stock otherwise Pulley dimensions are identical to stock. The larger diameter will move the belt tensioner counterclockwise at the bearing center only 3/32 inch more which is insignificant To be installed and tested within a few days after I get Plenum back on my 90' (with some modifications to IH and Plenum of course ) Belt Tensioner Billet Aluminum Ultra Light Pulley See item #9c of Bling (Carter and Others) __________________ Clickable links On Iphone Touchable Links -Solutions- LT5 Modifications/Rebuild Tricks Low Mileage ZR-1 Restoration 1990 Corvette (L98) Modifications LT5 Eliminated Systems LT5 Added Systems LT5/ZR-1 Fluids 1995 LT5 SPECIFIC TOP END REBUILD TRICKS Last edited by Dynomite; 09-09-2013 at 11:52 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode