![]() |
#11 |
![]() Join Date: Nov 2013
Location: Jacksonville, NC
Posts: 48
|
![]()
So I've had this amazing car for about a month and a half now, been reading everything I can find and learning a lot. It's raining and windy today so decided to go poke around in the garage a bit. Found out she has Dunn heads on both sides
![]() Driver side ![]() Passenger side ![]() Also looks like it has had C-beam plates added? My 87 doesn't have anything that looks like this so I'm assuming that's what this is: ![]() Also the PO had a switch installed under the seat to turn off the 1-4 forced shift. The light still turns on but I can choose my own gears. Can't wait for better weather! |
![]() |
![]() |
![]() |
#12 |
![]() Join Date: Dec 2003
Location: Arcadia, OK
Posts: 3,402
|
![]()
Yep, those are ZFDoc's c-beam plates. Nice catch on the Dunn head 95. Very nice Zee.
I spent the last several months of my 4 years active enlistment @ J-ville, 69/70. Semper Fi ![]() ![]()
__________________
Jerry Downey JERRYS LT5 GASKETS & PARTS http://www.jerrysgaskets.com 1994 ZR-1, Black/Black, Lingenfelter Aerobody, 416cu in, 3.91 gears, coil-over susp, Brembo brakes, etc. 2016 Black-Red, 3LT-Z51 Auto 8-speed. |
![]() |
![]() |
![]() |
#13 |
![]() Join Date: Nov 2013
Location: Jacksonville, NC
Posts: 48
|
![]()
Thanks Jerry and thanks for your service! I'll actually be retiring from the Corps this summer after 21 years and 6 years of it spent here in J-ville. I see you are in Edmond, went to MEPS in OK City and signed my enlistment papers in the Murrah Federal Building.
![]() Semper Fi |
![]() |
![]() |
![]() |
#14 |
Join Date: Dec 2012
Location: NC
Posts: 1,783
|
![]()
You thought about going to the vette show at Alcoke Chevy in New Bern there fletch? It's usually in early May...
|
![]() |
![]() |
![]() |
#15 |
![]() Join Date: Nov 2013
Location: Jacksonville, NC
Posts: 48
|
![]()
Haven't made it to that one yet, past couple of years I've had other things going that weekend. Might be able to make it this year. Our club, Caro-vettes, hosts a show here in Jacksonville in May also which this year should be May 18. I'm hoping to get out to some further shows this year if my schedule allows.
|
![]() |
![]() |
![]() |
Thread Tools | |
Display Modes | |
|
|