ZF6 Drain/Fill plug torque

[mike100]

tite enuf to not come loose!

it isn't load bearing, just a plug. You probably can't get a torque wrench in there anyhow unless you buy the German Hazet socket for that.

[XfireZ51]

I use a 17mm Allen wrench

[Josh]

Thanks guys.

For the fill plug I used a 17mm allen socket with a wrench on the hex (exhaust in the way of using a ratchet). I suppose a crow's foot could be used with a torque wrench this way if you really wanted an exact torque, but like y'all said it's just a fill plug...