Can't read SES codes

[MuRCieLaGo]

The (car) electrical shop is well reknown where I live. They pinned back the wire, and now everything seems to be fine on the car. No more SES, no more SRC.

I identified the repaired wire. If something goes wrong again, I'll use your infos and go from there.

Thanks a lot WVZR-1 and Dynomite, I appreciate your help.

[WVZR-1]

Originally Posted by MuRCieLaGo

The (car) electrical shop is well reknown where I live. They pinned back the wire, and now everything seems to be fine on the car. No more SES, no more SRC.

I identified the repaired wire. If something goes wrong again, I'll use your infos and go from there.

Thanks a lot WVZR-1 and Dynomite, I appreciate your help.

So long as they saved your terminal OR COINCIDENTALLY had a "plated" terminal you should be "golden". If they used a tin plated or a terminal with no seal then it's still not considered repaired I'd think. Good to see you're rolling though and it's "error free".

[MuRCieLaGo]

Originally Posted by WVZR-1

So long as they saved your terminal OR COINCIDENTALLY had a "plated" terminal you should be "golden". If they used a tin plated or a terminal with no seal then it's still not considered repaired I'd think. Good to see you're rolling though and it's "error free".

I'll keep an eye on it!