|
10-30-2007
|
#1 |
  
Join Date: Apr 2007
Location: Northern VA
Posts: 2,651
|
63 mm Throttle Body
I see a lot of Z owners mention 63mm throttle body as one of their mods.
Who makes it and about how much $? How does it differ from the stock throttle body and when does this mode make since? |
|
|
|
10-30-2007
|
#2 |
|
Guest
Posts: n/a
|
Re: 63 mm Throttle Body
The two big blades inside the TB are a 58mm size. The bore is enlarged to 63m and new butterflies are cut out and mounted up.
Cost is around 300. The gain on a P&P plenum and injector housing set is minimal. |
|
|
|
10-30-2007
|
#3 | |
|
Join Date: Jun 2006
Location: Sparks, NV
Posts: 2,843
|
Re: 63 mm Throttle Body
Quote:
Hans 
|
|
|
|
|
|
10-30-2007
|
#4 |
 Join Date: Aug 2005
Location: north of montreal
Posts: 510
|
Re: 63 mm Throttle Body
thats an interesting topic...i also heard that 58mm is big enough to feed a 350 cu.in,no matter what kind of mods you have...any real world results?...dyno comparo?
bj 91/1735 |
|
|
|
|
10-30-2007
|
#5 |
|
Guest
Posts: n/a
|
Re: 63 mm Throttle Body
I would rather see somebody put the 300 bucks towards headers than to modify the TB.
|
|
|
|
10-30-2007
|
#6 | |
 
Join Date: May 2007
Location: Peoria, AZ
Posts: 9,120
|
Re: 63 mm Throttle Body
Quote:
This is what Jeff told me 6 months unless you punch the block you are throwing your money away on this TB mod. |
|
|
|
|
|
10-31-2007
|
#7 |
|
Join Date: Oct 2007
Location: lone pine and mammoth lakes ca.
Posts: 544
|
Re: 63 mm Throttle Body
How about if ya give it an upper -cut !!!!!!!!!!!!!!! Sorry couldnt help my self
|
|
|
|
|
10-31-2007
|
#8 |
|
Join Date: Aug 2005
Location: San Fernando Valley, CA.
Posts: 896
|
Re: 63 mm Throttle Body
IMO if a 48mm TB will support a 502 CI BB the stock TB should be plenty for the LT5 even with plenty of porting. Sure, its comparing 2v to 4v but airflow is airflow.
|
|
|
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
