|
05-07-2008
|
#11 | |
  
Join Date: May 2007
Location: Peoria, AZ
Posts: 9,120
|
Re: Stainless Works headers
Quote:
__________________
GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director  91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V |
|
|
|
|
05-07-2008
|
#12 |
 Join Date: Jul 2005
Location: Auburn, Washington
Posts: 585
|
Re: Stainless Works headers
Wow, somebody at SW had a bad day. Reminds me of all the swearing and hammering we did when we installed your headers all those many moons ago, Jeff.
|
|
|
|
|
05-08-2008
|
#13 |
Join Date: Jul 2005
Location: Northern California
Posts: 73
|
Re: Stainless Works headers
Jeff,
The problem I had with the "new" Jeal Headers I just installed was the location of the drivers side 02 probe, it hit the bell housing. Had to grind quite a bit to get it in and give about 1/16" clearance. And one other problem area for the Calif. guys is the location of the EGR tube, it would not allow me to put in the top bolt on the K brace on the passenger side; had to remove the header, install the K brace then reinstall the header. And I could not intall all the bolts on the passenger side front port although I have no leaks. Jerry |
|
|
|
|
05-16-2008
|
#14 |
|
Guest
Posts: n/a
|
Re: Stainless Works headers
I just wanted to give an update, seeing as how panties are in a bunch over at CF.
Headers were received by SSW on Monday 12th. I had to call and ask for an update on the 14th. They agreed the primary tube #1 was sticking out further than it should, and they were inspecting the cnc pattern on the flange for any issues. As it stands, I have been doing the one calling to get info. I am about to call now and get an update on the flange issue. |
|
|
|
05-16-2008
|
#15 |
|
Join Date: Jan 2007
Location: Indianapolis, IN
Posts: 35
|
Re: Stainless Works headers
Jeff:
Don't know if you waded through all the BS on CF to see my post... If you have not done this already, contact Al Noe. He is basically Mr. SW's. When I was selling the headers to our community, he took care of any issues with incredible timeliness. Hope this helps. Regards Brian A. 90 ZR-1 12.09@118 01 Z06 not quite stock |
|
|
|
|
05-17-2008
|
#16 |
Join Date: Jul 2005
Location: Western Montana, now Maryland
Posts: 191
|
Re: Stainless Works headers
Jeff-
FYI- I installed my SW's in Feb 2004. Perfect fit, tight- but as you would expect with any application takes time to get all the bolts in. Love my system! Definitly a production problem since '04 anyhow |
|
|
|
|
05-17-2008
|
#17 | |
|
Join Date: Oct 2007
Location: lone pine and mammoth lakes ca.
Posts: 544
|
Re: Stainless Works headers
Quote:
|
|
|
|
|
|
05-17-2008
|
#18 | |
|
Join Date: Jul 2005
Location: Western Montana, now Maryland
Posts: 191
|
Re: Stainless Works headers
Quote:
In '04 I had 1 chance to buy a set of Jeals, as far as I know they were the last available set on the planet offered by Cory Henderson........I've never heard of them being available since then, they were offered to me at 3 times the price of SW's hense my decline. I fear you will only find them available as used, and as of this date I've never seen a set available. There are custum headers available today other than SW & the defunct Jeal which you can pursue, they will even hook up your AIR to them, find them using Google, may cost you a couple thousand but you'd probably love'm. |
|
|
|
|
|
05-17-2008
|
#19 |
|
Join Date: Jul 2005
Location: Northern California
Posts: 73
|
Re: Stainless Works headers
Guys,
I bought them off of e-bay, they were advertised as new with all the parts that came with them. Did the guy in Texas that owned them tell the truth? A number of folks saw them and bid as I did, just kept bidding until they were mine, $1050.00. Jerry |
|
|
|
|
07-15-2008
|
#20 |
|
Guest
Posts: n/a
|
Re: Stainless Works headers
Just to wrap up this discussion, SSW put the header back on the jig and the #1 pipe was not welded correctly. They sent out an updated set and everything installed perfectly. Car was a little late to the customer, but he understood and the weather was also crappy.
|
|
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
