|
|
|
01-18-2009
|
#1 |
|
Join Date: May 2007
Location: Chicagoland, IL
Posts: 9,686
|
Re: high idle
Jarek,
0 steps for IAC means it's completely closed. Outside air is getting in some other way. Throttle plates may be opened too far or there's an air leak. Loosen TPS and set it to .5v with scantool connected. You'll do that with ignition on, motor off. |
|
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
