|
02-05-2009
|
#12 |
 Join Date: Jul 2005
Posts: 77
|
Re: Clutch slave.
There is no need to use the bleeder valve. After installing the new slave, fill the master and start pumping the clutch pedal. It works better if you sidestep it. Sometime during the third beer, you will get all the air out of the system. Make sure you keep the master full.
Will Last edited by W i l l; 02-05-2009 at 02:57 PM. |
|
|
| Thread Tools | |
| Display Modes | |
|
|
Threaded Mode