atomicGs- zr1

[Z51JEFF]

One of these days were going to have to get a few ZR-1s together for some pictures.Im in Fremont,one more in Livermore and maybe one more in San Jose.Might be able to dig up a few more.

[tomtom72]

Nice Christmas present!....no, check that, really, really, really NICE Christmas present!


I always liked the idea of a stripe....guess I've spent too much time in the 60's & 70's! You know those Z28's, 442's, GS's, shelby 'stangs, GTX's. I'd love a silver stripe on my black Z.

Anyway, I think that car is one cool looking ZR-1! I hope you enjoy your Christmas present for a really long time to come!

[WB9MCW]

Very Nice your combination works well.

We have a member here (Dennis) who drives this one

[RICKYRJ1]

Wasn't your car black at one time? Might have you mixed up with someone else Car looks great! enjoy If I had the balls & money I would do a black Callaway Pkg with a silver & red stripe

[shaynezrl]

Originally Posted by RICKYRJ1

Wasn't your car black at one time? Might have you mixed up with someone else Car looks great! enjoy If I had the balls & money I would do a black Callaway Pkg with a silver & red stripe

Yes you are right the car was black before. After getting the car from my brother inlaw few years ago i noticed that the paint was old and some of the clear was fading on the driver side so now a few years later its finally done.

Scott..yea Santa was good to me..but i had to pay for it hehe.

[shaynezrl]

Originally Posted by WB9MCW

Very Nice your combination works well.

We have a member here (Dennis) who drives this one

Yes i did see this car before ..it is georgeous bad. I have to admit after seeing this car a year back. It kind of gave me an idea of what paint color to go with. I decide to go with an 07 z06 atomic orange with a hint of perl in it. I love the Callaway kit on this car too..drool drool..

[shaynezrl]

Originally Posted by RHanselman

What Brakes do you have under there?

Car looks Great! I do like them Shelby Wheels

Cheers,

Ron,

Those brakes are from 07 z06 with 14 inch rotors. The calipers had to be modified to fit inside the Shelby wheels.

Shayne

[shaynezrl]

Originally Posted by GOLDCYLON

I would like to see the underside of the hood as well

I will try to get a shot of the underside when i get a chance..just to let know ahead. Basically the hood was cut the size of 9x14 inc on each side then drilled and match all the hole on the louvers holding together with rivets. I was going to use button heads screws, but Raceace.com supplied the necessary rivets.

Z51Jeff..you're right we have to get together someday. I know that there are quite a few Z's in our area. Maybe someday we can get out from our busy schedule meet up and talk about this great car that we have. I had a chance to see your car in the mag...I have to say you have one beautifull Z.

Shayne

[-=Jeff=-]

How did you determine where to mount the louvers?

I really like those

[A1990]

Must be the perl you added that makes it look more orange than mine.