TB Coolant Crossover/Bypass, Any Disadvantages?

[scholtmj]

Originally Posted by Z51JEFF

Anybody got some pictures of this mod?I broke out the tube cutter,bender,flaring tool and then ran into a wall.The plan was to make a hard line and run it under the front of the plenum keeping the coolant line intact,no room wont work.Next plan was to plug the line on both sides of the TB with the lines intact keeping the look stock.My question is the small line coming off the TB going back into the plenum,is this for a return back into the system only?Ive even thought about removing the TB plate and filling the cavity with epoxy to seal out the coolant,thats a bit drastic.

http://zr1specialist.com/HAT%20Web/p...t%20bypass.htm

Is this what you're looking for?