Original Factory NIB LT5 Thermostat Housing! - Page 2 - ZR-1 Net Registry Forums

-=Jeff=- · 01-02-2009

Quote:

Originally Posted by phrogs

This has to be one if the most asked for parts requests that I get.

do these break quite often? or get damaged?

xlr8nflorida · 01-02-2009

Quote:

Originally Posted by -=Jeff=-

do these break quite often? or get damaged?

Electrolysis can do them in over time and also if you or your mechanic is not careful, you can break it.

limey · 01-02-2009

Quote:

Originally Posted by phrogs

This has to be one if the most asked for parts requests that I get.

Agreed,

At least twice a month! When anyone buys a motor from a junk yard, they always leave these bolted to the frame and they get destroyed or lost. Hot rodders too, buying crate motors never come with the motor, they need these as well.

Second most requested part, coolant crossover tubes.

On a side note, i had quoted to make these thermostat housings a couple years ago, cost was less than $500.00 for them if i remember correctly, i'll wait to see what this goes for and decide if i should pursue this project.

Sgreg · 01-02-2009

Quote:

Originally Posted by limey

Agreed,

At least twice a month! When anyone buys a motor from a junk yard, they always leave these bolted to the frame and they get destroyed or lost. Hot rodders too, buying crate motors never come with the motor, they need these as well.

Second most requested part, coolant crossover tubes.

On a side note, i had quoted to make these thermostat housings a couple years ago, cost was less than $500.00 for them if i remember correctly, i'll wait to see what this goes for and decide if i should pursue this project.

Kurt, I think you estimated $650 for the repro not $500. Could be wrong though. Interesting sidebar on the new Bay t-housing. The quick disconnect fitting is not the original design. Has been replaced with the new design so you "all correct folks" may need to find a fitting for judging.

limey · 01-02-2009

I just checked my initial post & it was back in 2006:

Price for outer piece, GM part # 14104599 is going to cost $265.14

Price for Inner piece, (This been the part where the over flow pipe attaches
into, as well as houses the Thermostat) GM part # 14104598 is going to cost
$395.26
If you buy the two pieces as a set, the cost with thermostat and seal
included is $624.41

Good memory you have!

Jagdpanzer · 01-07-2009

Winning bid:US $655.00

01-07-2009

Quote:

Originally Posted by Jagdpanzer

Winning bid:US $655.00

If he had sold it this past summer or a year ago, 1k easily.

Sgreg · 01-07-2009

Quote:

Originally Posted by Jagdpanzer

Winning bid:US $655.00

A bargain !!

GOLDCYLON · 01-07-2009

Too rich for my blood for shelfware. So who got it???

xlr8nflorida · 01-07-2009

I put a bid of $745 and crossed my fingers.

01-02-2009	#15
limey Join Date: Oct 2008 Location: tampa Posts: 539	Re: Original Factory NIB LT5 Thermostat Housing! I just checked my initial post & it was back in 2006: Price for outer piece, GM part # 14104599 is going to cost $265.14 Price for Inner piece, (This been the part where the over flow pipe attaches into, as well as houses the Thermostat) GM part # 14104598 is going to cost $395.26 If you buy the two pieces as a set, the cost with thermostat and seal included is $624.41 Good memory you have!

01-07-2009	#16
Jagdpanzer Join Date: Apr 2007 Location: Northern VA Posts: 2,647	Re: Original Factory NIB LT5 Thermostat Housing! Winning bid:US $655.00

01-07-2009	#19
GOLDCYLON Join Date: May 2007 Location: Peoria, AZ Posts: 9,153	Re: Original Factory NIB LT5 Thermostat Housing! Too rich for my blood for shelfware. So who got it??? __________________ GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director 91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V

01-07-2009	#20
xlr8nflorida Join Date: May 2008 Location: USA Posts: 1,096	Re: Original Factory NIB LT5 Thermostat Housing! I put a bid of $745 and crossed my fingers. Last edited by xlr8nflorida; 03-25-2009 at 11:33 AM.