ZR-1 Net Registry Forums  

Go Back   ZR-1 Net Registry Forums > Off Topic > OFF TOPIC

Reply
 
Thread Tools Display Modes
Old 01-10-2014   #71
Paul Workman
 
Paul Workman's Avatar
 
Join Date: Nov 2007
Location: Squires (near Ava MO in the Mark Twain N'tl Forest) - Missouri
Posts: 6,493
Default Re: to my FBI brothers

Quote:
Originally Posted by WARP TEN View Post
Dom, don't you have a heated garage yet? I blew some insulation in the ceiling and sides of mine and installed an electric heater hanging from the ceiling. The heater and 220 line cost about $600. I keep it at about 50 degrees most of the winter but if I want to work I can run it up to 60 or more temporarily. Here is a picture-- you can see it in the back corner. Very happy with the results. It doesn't seem to adversely affect my electric bills materially. -- Bob
DAYAM, Bob!

I'd kiss a pig to have that setup!!

__________________
Good carz, good food, good friendz = the best of timez!

90 #1202
"FBI" top end ported & relieved
Cam timing by "Pete the Greek"
Sans secondaries
Chip & dyno tuning by Haibeck Automotive
SW headers, X-pipe, MF muffs

Former Secretary, ZR-1 Net Registry
Paul Workman is offline   Reply With Quote
Old 01-10-2014   #72
Racinfan83
 
Join Date: Apr 2013
Location: Eastern Missouri
Posts: 773
Default Re: to my FBI brothers

Yeah that is SaWEET! I have a 9' ceiling in my garage but not enough $ for the lift...
__________________
[LEFT][SIGPIC][/SIGPIC][/LEFT]
[CENTER][COLOR=Indigo][SIZE=4][I][B] **Now Sold** 1990 ZR-1 #2093, Black on Black..[/B][/I][/SIZE][/COLOR][/CENTER]
Racinfan83 is offline   Reply With Quote
Old 01-11-2014   #73
WARP TEN
 
WARP TEN's Avatar
 
Join Date: Apr 2007
Location: Lake Bluff, IL
Posts: 2,043
Default Re: to my FBI brothers

Quote:
Originally Posted by Racinfan83 View Post
Yeah that is SaWEET! I have a 9' ceiling in my garage but not enough $ for the lift...
I have 10'--just enought for a 4' tall ZR-1 and a 5' tall BMW 535xi. You could do 9' with a pair of Z's! Lift was about $2,200 but I had it installed for $900 including delivery costs. For me worth every penny. --Bob
__________________
2016 Long Beach Red Z06 #10281 "POPS Z"
1995 Polo Green #409 "WARP TEN"--Haibeck 350/510 package, 4.10s, Hurst, Stock Exhaust with QTP Cutouts
--Sold but still running strong
1993 Quasar Blue #161 "HIL KING"
--Sold but still running strong, now with more than 120,000 miles
1967 Marlboro Maroon/Saddle Corvette Coupe 300 hp/4-spd
--Sold a long time ago
ZR-1 Net Registry Founding Member #95
NCM Lifetime Member
Favorite Quote--Attributed to Mickey Thompson:
"Too Much Horsepower is Almost Enough"
WARP TEN is offline   Reply With Quote
Old 01-11-2014   #74
WARP TEN
 
WARP TEN's Avatar
 
Join Date: Apr 2007
Location: Lake Bluff, IL
Posts: 2,043
Default Re: to my FBI brothers

Quote:
Originally Posted by -=Jeff=- View Post
Bob where did you get it from?
Hi Jeff--If you mean the heater, I just had my electrician get it. Can't remember the brand name but you can google garage heaters and get lots of info. --Bob
__________________
2016 Long Beach Red Z06 #10281 "POPS Z"
1995 Polo Green #409 "WARP TEN"--Haibeck 350/510 package, 4.10s, Hurst, Stock Exhaust with QTP Cutouts
--Sold but still running strong
1993 Quasar Blue #161 "HIL KING"
--Sold but still running strong, now with more than 120,000 miles
1967 Marlboro Maroon/Saddle Corvette Coupe 300 hp/4-spd
--Sold a long time ago
ZR-1 Net Registry Founding Member #95
NCM Lifetime Member
Favorite Quote--Attributed to Mickey Thompson:
"Too Much Horsepower is Almost Enough"
WARP TEN is offline   Reply With Quote
Old 01-11-2014   #75
GOLDCYLON
 
GOLDCYLON's Avatar
 
Join Date: May 2007
Location: Peoria, AZ
Posts: 9,153
Default Re: to my FBI brothers

Quote:
Originally Posted by WARP TEN View Post
Dom, don't you have a heated garage yet? I blew some insulation in the ceiling and sides of mine and installed an electric heater hanging from the ceiling. The heater and 220 line cost about $600. I keep it at about 50 degrees most of the winter but if I want to work I can run it up to 60 or more temporarily. Here is a picture-- you can see it in the back corner. Very happy with the results. It doesn't seem to adversely affect my electric bills materially. -- Bob
Nice setup. Includes a beer fridge.
__________________
GOLDCYLON - 91 ZR-1 #2014
GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's)

GOLDCYLON - 11 CTS-V


Arizona State Director




91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat

90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat

11 RED/GREY CTS-V
GOLDCYLON is offline   Reply With Quote
Old 01-11-2014   #76
WARP TEN
 
WARP TEN's Avatar
 
Join Date: Apr 2007
Location: Lake Bluff, IL
Posts: 2,043
Default Re: to my FBI brothers

Quote:
Originally Posted by GOLDCYLON View Post
Nice setup. Includes a beer fridge.
That was a primary criterion for the lift :-) It had to allow room for the fridge and tool box. Fridge is 3' deep. To allow for it, though, note that my ramps have to go outside. -- Bob
__________________
2016 Long Beach Red Z06 #10281 "POPS Z"
1995 Polo Green #409 "WARP TEN"--Haibeck 350/510 package, 4.10s, Hurst, Stock Exhaust with QTP Cutouts
--Sold but still running strong
1993 Quasar Blue #161 "HIL KING"
--Sold but still running strong, now with more than 120,000 miles
1967 Marlboro Maroon/Saddle Corvette Coupe 300 hp/4-spd
--Sold a long time ago
ZR-1 Net Registry Founding Member #95
NCM Lifetime Member
Favorite Quote--Attributed to Mickey Thompson:
"Too Much Horsepower is Almost Enough"

Last edited by WARP TEN; 01-11-2014 at 04:55 PM.
WARP TEN is offline   Reply With Quote
Old 01-11-2014   #77
Blue Flame Restorations
 
Blue Flame Restorations's Avatar
 
Join Date: Feb 2010
Location: Pendleton, IN
Posts: 3,904
Default Re: to my FBI brothers

My ramps on my Direct Lift drop downward when the lift is raised and then clear the garage door. When the lift is lowered, they extend outside the doorway. Luckily, I can drive a ZR-1 underneath the hanging ramps buy about three-four inches and still have one ZR-1 on top in storage. I just have to remember to turn OFF the radio so the antenna doesn't get bent.

Your garage is super clean!

My ceiling is 10'-4".
__________________
1988 KOH Prototype EX5023 sold
1990 ZR-1 #444 Convertible
1990 ZR-1 Black #966
1991 ZR-1 Quazar Blue #296
1957 Duntov SS Project

Last edited by Blue Flame Restorations; 01-11-2014 at 04:55 PM.
Blue Flame Restorations is offline   Reply With Quote
Old 01-11-2014   #78
WARP TEN
 
WARP TEN's Avatar
 
Join Date: Apr 2007
Location: Lake Bluff, IL
Posts: 2,043
Default Re: to my FBI brothers

Quote:
Originally Posted by Blue Flame Restorations View Post
My ramps on my Direct Lift drop downward when the lift is raised and then clear the garage door. When the lift is lowered, they extend outside the doorway. Luckily, I can drive a ZR-1 underneath the hanging ramps buy about three-four inches and still have one ZR-1 on top in storage. I just have to remember to turn OFF the radio so the antenna doesn't get bent.

Your garage is super clean!

My ceiling is 10'-4".
Hi Brett- The garage was super clean when I installed the lift and took the picture. With our weather lately it is now a mess! I don't use the original steel ramps--they weigh too much and in my situation I have to put them on and off regularly. I got some Race Ramps which are only about 15 pounds. They work great. Also, I have replaced a couple of antennas and am contemplating installation of an antenna switch which some have done. Sorry I don't have a better picture handy, but in the one below you can barely make out at the bottom a sign I have posted on the lift in block letters: "LOWER ANTENNA". -- Bob

__________________
2016 Long Beach Red Z06 #10281 "POPS Z"
1995 Polo Green #409 "WARP TEN"--Haibeck 350/510 package, 4.10s, Hurst, Stock Exhaust with QTP Cutouts
--Sold but still running strong
1993 Quasar Blue #161 "HIL KING"
--Sold but still running strong, now with more than 120,000 miles
1967 Marlboro Maroon/Saddle Corvette Coupe 300 hp/4-spd
--Sold a long time ago
ZR-1 Net Registry Founding Member #95
NCM Lifetime Member
Favorite Quote--Attributed to Mickey Thompson:
"Too Much Horsepower is Almost Enough"
WARP TEN is offline   Reply With Quote
Old 01-11-2014   #79
Racinfan83
 
Join Date: Apr 2013
Location: Eastern Missouri
Posts: 773
Default Re: to my FBI brothers

Quote:
Originally Posted by WARP TEN View Post
I have 10'--just enought for a 4' tall ZR-1 and a 5' tall BMW 535xi. You could do 9' with a pair of Z's! Lift was about $2,200 but I had it installed for $900 including delivery costs. For me worth every penny. --Bob
You know that isn't as bad as I was thinking..
And I went and measured and my ceiling in the garage is 10'3". I was thinking 9' because that's what my interior ceilings are... It is something to think about - I could put the Z up top and back my dd Civic in under it. That would actually give me room in my 3 car garage for an actual work space.

And I got one of these: http://www.parts123.com/parts123/yb....5Z50000050F~~~ for my antenna. Haven't hooked it up yet - it's in the boxes o parts for when it warms up... Might help you guys with the lifts?
__________________
[LEFT][SIGPIC][/SIGPIC][/LEFT]
[CENTER][COLOR=Indigo][SIZE=4][I][B] **Now Sold** 1990 ZR-1 #2093, Black on Black..[/B][/I][/SIZE][/COLOR][/CENTER]
Racinfan83 is offline   Reply With Quote
Old 01-11-2014   #80
XfireZ51
 
Join Date: May 2007
Location: Chicagoland, IL
Posts: 9,678
Default Re: to my FBI brothers

Bob,


Yours is a 2.5car garage? What did the insulation cost you? I know I don't have any in my garage attic. Blowing it into the sidewalls would help rest of the house too. I do have a pair of insulated coveralls however. A bit cheaper.
__________________
[SIGPIC][/SIGPIC]Former Membership Chairman
Former ZR-1 Registry - BOD
1972 Corvette 4speed base Coupe SOLD long time ago
1984 Corvette Z-51/4+3 SOLD
1992 Corvette ZR-1 Aqua/Gray #474 SOLD
1992 Corvette ZR-1 Black Rose/Cognac #458
2014 Honda VFR Interceptor DX
XfireZ51 is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 05:13 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright ZR-1 Net Registry 2020