Secondary actuators
 

Dose anyone have a failed secondary actuator they woud want to donate so I could see if I can disect it and see if I can do a write up on rebuilding them so we dont have to rely on 20+ year old OEM parts on shelves it seems to be one of the rare specific parts on our cars. I figured if I found out how to rebuild our tensioners may as well tackle the next part.

Dave

Re: Secondary actuators
 

Dave

Yes. I've got one you are welcome to have

Can you write up an article for the hotb?

What's your address?

I'll get it in the mail to you tomorrow

Cheers

David

Re: Secondary actuators
 

Zzzzr1 I'm not familiar with the term hotb. And thank you so much for the secondary

Dave

Re: Secondary actuators
 

Heart Of The Beast, newsletter

Re: Secondary actuators
 

HOTB - Heart Of The Beast

The Registry's "newsletter"

Looks like "PhillipsLT5" and I were somewhat "simultaneous". Anyway that's it!

Secondary actuator installation
 

The best explanation on how to install the secondary canister is provided by Jerry. Very appropriate here for backup information :thumbsup:

I have installed NEW canisters with the linkage arm straight contrary to what is/was normal (the original canisters were properly installed with the linkage arm at an angle). I have also modified the canister arm for an original installation so the arm did not contact the canister arm opening. Secondary Canister Installation TIPS

Both installations seem to function without any interference.
But for the record see Secondary Canister Installation FACTS TIPS

http://www.zr1.net/forum/attachment....1&d=1387094563

Re: Secondary actuators
 

Oh of course I'm good friends with Mark that writes it now. He is publishing my work on the tensioner rebuild and I think he will find the secondary and a few of my others very interesting.

Dave

Re: Secondary actuators
 

Dave

Will send you the piece Monday.

Thanks!!!!

David

Re: Secondary actuators
 

If you need another one, let me know. I have a couple.

By the way, when I redid my secondaries, I had one of the "new" actuators and "new" secondary vac solenoid fail within a month of install! I replaced the failed actuator with the good old one I removed, and bought a new solenoid. All has worked great for a couple years now.

Re: Secondary actuators
 

I found the part under another part number and it was used as a egr component on another vehicle all i had to do is trim a little peice of plastic to allow the connector to work. When I get home Ill post the part number

https://www.facebook.com/photo.php?f...0&l=89904940bb

https://www.facebook.com/photo.php?f...4&l=33ad5b6396

https://www.facebook.com/photo.php?f...0&l=8f262eb197

https://www.facebook.com/photo.php?f...1&l=fc469f6276



Dave

Re: Secondary actuators
 

What was the part number off the egr?

Re: Secondary actuators
 

Okay just got home. Its part number is 1997223 you have to switch the brackets it a breeze

Here is a example of where to get it

https://www.rockauto.com/dbphp/x,car..._Solenoid.html

Dave Hetrick

Re: Secondary actuators
 

Also there is a small tab on the plug connector that needs to be trimmed out with a exacto knife and a needle nose but it OHms out to the factory one and the continuity was the same
Dave Hetrick

Re: Secondary actuators
 

Thank you. Thank you. =D> Will order two tomorrow.

Re: Secondary actuators
 

No worries Richard.

Dave