Quote:
Originally Posted by 90ZR1#1221
Got the pan out and well there's nothing unusual. Just a lot of dirt. Between the heat shields, jacking the motor up and everything else I can already see that it's going to be twice as much fun to put it back in the car. So if anyone has tips to get it back in it would be greatly appreciated. And note to self I need to go buy 1/4" swivels
|
I use a bit (small bit) of Permatex Super "300" Form A Gasket on both sides of the oil pan gasket where oil is involved (making sure all surfaces are dry before using the Permatex)
Jerry's pan gasket for the 90'-92' requires a new
"O" ring which is the same diameter but
thicker for the
oil pick up. Just make sure you keep that "O" ring in place as you position the oil pan with new gasket.
I use Blue Loctite on ALL Oil Pan Bolts.
Installing New Oil Pan Gasket