|
05-17-2015
|
#1 |
 
Join Date: Apr 2007
Location: Northern VA
Posts: 2,645
|
WTB Driver Side Quarter Molding
I busted mine off again getting out of the car the other day and this time its beyond repair. Its the short one that fits between the door and rear wheel well. Goes under GM P/N 10174881 and fits 91-95 ZR-1s. Need the left one but will take both left and right sides if you have them.
__________________
Phil Wasinger 1994 Torch Red ZR-1 WAZOO Member George Braml Intake |
|
|
|
05-20-2015
|
#2 |
  
Join Date: May 2007
Location: Peoria, AZ
Posts: 9,153
|
Re: WTB Driver Side Quarter Molding
Phil Ive been looking for you as well. No good news yet.. Darn doglegs are HTF unless its like one below
 http://www.ebay.com/itm/Corvette-NOS...f23bff&vxp=mtr
__________________
GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director  91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V Last edited by GOLDCYLON; 05-20-2015 at 11:54 AM. |
|
|
|
|
05-20-2015
|
#3 |
|
Join Date: Apr 2007
Location: Northern VA
Posts: 2,645
|
Re: WTB Driver Side Quarter Molding
[QUOTE=GOLDCYLON;226066]Phil Ive been looking for you as well. No good news yet.. Darn doglegs are HTF unless its like one below
If nothing turns up I might try my hand at shortening a base C4 quarter molding which appear to be a lot more plentiful than ours. Wish me luck.
__________________
Phil Wasinger 1994 Torch Red ZR-1 WAZOO Member George Braml Intake Last edited by Jagdpanzer; 05-20-2015 at 07:23 PM. |
|
|
|
|
05-21-2015
|
#4 |
 
Join Date: Aug 2005
Location: Pa
Posts: 115
|
Re: WTB Driver Side Quarter Molding
I can make a call to see if the person I got the 25 or so from has any more, give me a day or two to get an answer.
|
|
|
|
|
05-23-2015
|
#5 | |
Join Date: Dec 2007
Location: Fremont,Ca
Posts: 3,039
|
Re: WTB Driver Side Quarter Molding
[QUOTE=Jagdpanzer;226100]
Quote:
|
|
|
|
|
|
05-25-2015
|
#6 |
|
Join Date: Aug 2005
Location: Pa
Posts: 115
|
Re: WTB Driver Side Quarter Molding
I spoke to him, he is checking, but he thought he sold me all he had.
Bill Did you check wit the lead from Florida I sent you? |
|
|
|
 |
|
|
Linear Mode
