ZR-1 Net Registry Forums  

Go Back   ZR-1 Net Registry Forums > C4 ZR-1 > C4 ZR-1 Technical Postings

Reply
 
Thread Tools Display Modes
Old 06-01-2021   #1
petervankleeck
 
Join Date: Mar 2019
Location: Manassas, VA
Posts: 25
Default Vacuum Pump Problem

1990 #659

Gentlemen,

If I disconnect the first vacuum line connector near the alternator, and put my thumb over the line from the pump closing it off, shouldn't the pump stop running? This pump keeps running when the line is closed with my finger. It does draw some vacuum but not enough to stop the pump?

Any help would be appreciated. My first thought was to purchase another pump but I wanted to check here to see if there was something I was missing.

Thanks!

Peter
petervankleeck is offline   Reply With Quote
Old 06-01-2021   #2
TX '90 ZR1
 
TX '90 ZR1's Avatar
 
Join Date: Oct 2017
Location: TX
Posts: 1,963
Default Re: Vacuum Pump Problem

Quote:
Originally Posted by petervankleeck View Post
1990 #659

Gentlemen,

If I disconnect the first vacuum line connector near the alternator, and put my thumb over the line from the pump closing it off, shouldn't the pump stop running? This pump keeps running when the line is closed with my finger. It does draw some vacuum but not enough to stop the pump?

Any help would be appreciated. My first thought was to purchase another pump but I wanted to check here to see if there was something I was missing.

Thanks!

Peter
Peter,
You are correct that it should cut off in this situation.
I'd check the line to the pump and make sure it is not leaking. If not I would assume it is an issue with the cutoff in the pump or the pump itself.
I am not sure if these are repairable. Maybe a greater mind than mine will chime in with more thoughts.
__________________
Kenny
1990 #442

Last edited by TX '90 ZR1; 06-01-2021 at 08:44 PM. Reason: addition
TX '90 ZR1 is offline   Reply With Quote
Old 06-01-2021   #3
petervankleeck
 
Join Date: Mar 2019
Location: Manassas, VA
Posts: 25
Default Re: Vacuum Pump Problem

Thanks Ken for your reply.

I did check the line after I initiated the thread and the line looks good. I plugged the outlet port on the pump and could not get it to stop.

It would be great to know if it can be repaired or to hear from someone who has done the work.

Thanks again.
Peter
petervankleeck is offline   Reply With Quote
Old 06-02-2021   #4
dredgeguy
 
dredgeguy's Avatar
 
Join Date: Aug 2012
Location: Ellicott City, MD
Posts: 1,635
Default Re: Vacuum Pump Problem

Peter,
If you can wait until Jim gets back from his Utah trip in a couple of weeks you can bring your car up to our Wazoo maintenance day in Westminster, MD. If you want to get this taken care of sooner, contact Dempsey at his shop in Fredericksburg, VA
http://www.evolution-motorsport.com/locations.html.
Keep us posted.
__________________
Charlie

__________
Dredgeguy
WAZOO Member

1992 Bright Red/Black ZR1 #246
Dana 4:10 gears
Polished LT5 by Haibeck
Polished Fikse FM5's with Michelin Pilot Sport 2
Stainless Works headers and cats with Corsa
dredgeguy is offline   Reply With Quote
Old 06-02-2021   #5
petervankleeck
 
Join Date: Mar 2019
Location: Manassas, VA
Posts: 25
Default Re: Vacuum Pump Problem

Thanks Charlie,

When is your next WAZOO maintenance day?

Peter
petervankleeck is offline   Reply With Quote
Old 06-02-2021   #6
dredgeguy
 
dredgeguy's Avatar
 
Join Date: Aug 2012
Location: Ellicott City, MD
Posts: 1,635
Default Re: Vacuum Pump Problem

When Jim gets back from his cross country trip. He will be back around June 15 so likely the following weekend.
__________________
Charlie

__________
Dredgeguy
WAZOO Member

1992 Bright Red/Black ZR1 #246
Dana 4:10 gears
Polished LT5 by Haibeck
Polished Fikse FM5's with Michelin Pilot Sport 2
Stainless Works headers and cats with Corsa
dredgeguy is offline   Reply With Quote
Old 06-16-2021   #7
petervankleeck
 
Join Date: Mar 2019
Location: Manassas, VA
Posts: 25
Default Re: Vacuum Pump Problem

Resolution: I purchased a used 1990 ZR1 vacuum pump I found on Ebay, identical to mine. Plugged everything in and the pump works as designed. Turn the key on, it runs for a few seconds (good vacuum), cuts off and we're on our way.
petervankleeck is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 09:42 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright ZR-1 Net Registry 2020