|
06-29-2022
|
#1 |
 Join Date: Jun 2022
Location: Alpharetta
Posts: 28
|
WTB - Rear license plate holder
My 94 has a crack at the bottom. Not bad, but I'd like one without a crack in it. One of the previous owners probably didn't know you remove the screws, pull the entire holder, and let the plate come out of the slot.
From what I can tell, looks like the ZR-1 isn't compatible with the standard Corvettes, as the license plate holder appears to be wider. |
|
|
|
06-29-2022
|
#2 |
 Join Date: Aug 2014
Location: Chantilly, VA
Posts: 37
|
Re: WTB - Rear license plate holder
Jagdpanzer made some from scratch that came out really nice. I have one on my ?91. Check w him as he may still have some or be able to make you one.
__________________
1990 black on black #1042 - sadly - sold 1993 Ruby #140 - stock 1991 QB #1608 - heads and top end ported, Watson headers, B&B 3"exhaust, Haibeck chip, 4.10 gears |
|
|
|
|
06-30-2022
|
#3 |
|
Join Date: Nov 2011
Location: Dunbarton NH
Posts: 7,271
|
Re: WTB - Rear license plate holder
Like Andy said.
Original are extremely rare. |
|
|
|
|
07-02-2022
|
#4 |
|
Join Date: Jun 2022
Location: Alpharetta
Posts: 28
|
Re: WTB - Rear license plate holder
Thanks. I decided to buy some sheets of ABS plastic, and I'll just make a new one. The texture won't be a 100% match, but to the untrained eye, no one will know anything is different.
|
|
|
|
|
07-11-2022
|
#5 |
|
Join Date: Jun 2022
Location: Alpharetta
Posts: 28
|
Re: WTB - Rear license plate holder
Thought I had some pictures, but I ordered 3 24"x16" sheets of black abs plastic and made a new plate housing. I didn't do a great job with the outer opening corners, so I'll probably redo it at a later time. But from 15' away nothing looks out of place.
Functions exactly like the old one. Slot for the plate to slide inside the "pocket". All in cost was about $40 and 90 minutes of my time. |
|
|
|
|
07-11-2022
|
#6 |
Join Date: Jul 2013
Location: Central Iowa
Posts: 190
|
Re: WTB - Rear license plate holder
I have one from my '90 that is fine. I assume all years are the same??
__________________
[CENTER][SIZE=4][COLOR=red]1990 ZR-1 Red / Red[/COLOR][/SIZE][/CENTER] |
|
|
|
|
07-15-2022
|
#7 | |
   
Join Date: May 2007
Location: Peoria, AZ
Posts: 9,153
|
Re: WTB - Rear license plate holder
Quote:
__________________
GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director  91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V |
|
|
|
|
 |
|
|
Linear Mode
