|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
11-07-2009
|
#1 |
|
Join Date: May 2008
Location: Livermore, California
Posts: 61
|
What size allen wrench do I need for the Transmission oil fill/add bolts?
...also what fluid would be a acceptable other then that BMW stuff I keep hearing about.
Thanks in advance.......... |
|
|
|
11-07-2009
|
#2 |
 
Join Date: Apr 2007
Location: Northern VA
Posts: 2,644
|
Re: What size allen wrench do I need for the Transmission oil fill/add bolts?
17mm
|
|
|
|
|
11-07-2009
|
#3 | |
|
Join Date: May 2008
Location: Livermore, California
Posts: 61
|
Re: What size allen wrench do I need for the Transmission oil fill/add bolts?
Quote:
Ok thanks!!! |
|
|
|
|
|
11-07-2009
|
#4 |
 
Join Date: Aug 2006
Location: Edmonton, Alberta or Phoenix, Arizona
Posts: 2,742
|
Re: What size allen wrench do I need for the Transmission oil fill/add bolts?
Make sure you put good pressure on the 17mm socket when loosening, it's not a very deep allen head plug.
__________________
There are no limit's mans ingenuity, just as mans ingenuity will never conquer the forces & behavior of this planet...Smokey Y. |
|
|
|
|
11-09-2009
|
#5 |
 Join Date: Jan 2007
Location: Florida
Posts: 241
|
Re: What size allen wrench do I need for the Transmission oil fill/add bolts?
The cheapest and easiest way to go is to buy a 17mm hex key cut an inch and a half off the end and use 17mm socket and probably a breaker bar if it has not been off before.
|
|
|
|
|
11-09-2009
|
#6 |
|
Join Date: Apr 2007
Location: Northern VA
Posts: 2,644
|
Re: What size allen wrench do I need for the Transmission oil fill/add bolts?
Sears has a short arm 17mm allen wrench for about 9$ that works fine with a cheater.
 http://www.sears.com/shc/s/p_10153_1...rd=17+mm+allen |
|
|
|
|
01-05-2010
|
#7 | |
  
Join Date: Aug 2009
Location: South Dakota/California
Posts: 3,788
|
Re: What size allen wrench do I need for the Transmission oil fill/add bolts?
Quote:
|
|
|
|
|
|
01-05-2010
|
#8 | |
Join Date: Nov 2007
Location: Sunshine State
Posts: 1,071
|
Re: What size allen wrench do I need for the Transmission oil fill/add bolts?
Quote:
__________________
[B]1990 #2815[/B] [COLOR="Red"][B]Red/Red[/B][/COLOR] Ported Plenum & IH (by Pete) Haibeck Chip Rebuilt FPR (by Phil) FIC Injectors Watson LT Headers 3" Stainless Works exhaust Lingenfelter Open Air Lid Bill B Built Transmission Shifter & C Beam Plates [FONT=Impact][COLOR=red]1992 [COLOR=black]#[/COLOR] 091[/COLOR][/FONT] [FONT=Impact][COLOR=#ff0000]Red/[COLOR=silver]Gray[/COLOR][/COLOR][/FONT] [B]SOLD[/B] |
|
|
|
|
|
01-05-2010
|
#9 |
Join Date: Dec 2003
Location: Chicagoland,IL
Posts: 2,680
|
Re: What size allen wrench do I need for the Transmission oil fill/add bolts?
__________________
'91 #1635 PoloGreen 350 LT5 11.09 @ 129.27 11.04 @ 128.86 474RWHP 400RWTQ http://www.youtube.com/watch?v=SFNFOhGGlR4 http://www.youtube.com/watch?v=ZlRIOMwaDYY https://sites.google.com/site/peteszr1garage |
|
|
|
|
01-05-2010
|
#10 |
|
Join Date: Aug 2006
Location: Edmonton, Alberta or Phoenix, Arizona
Posts: 2,742
|
Re: What size allen wrench do I need for the Transmission oil fill/add bolts?
BMW TWS & in the Diff. use GM's new(er) tricky stuff...can't think of the name of it off the top of my head right now...
 ?
__________________
There are no limit's mans ingenuity, just as mans ingenuity will never conquer the forces & behavior of this planet...Smokey Y. |
|
|
|
|
|
|
Linear Mode
