04-20-2015 | #1 |
Join Date: Jul 2007
Location: Bartlett, IL
Posts: 7,137
|
looking for harness brackets/clamps
Not sure the specific name, but I am looking for the harness brackets that hold the harness at the Bellhousing
Thanks
__________________
1990 Corvette ZR-1 #1051 Watson Headers (2" Primary) - 3" Magnaflow Bullet cats - LT4 Catback Late Model IH - Plenum Coilovers - 4.10s Custom Interior NCM Lifetime Member #978 |
04-21-2015 | #2 |
Join Date: Dec 2003
Location: Chicagoland,IL
Posts: 2,680
|
Re: looking for harness brackets/clamps
Jeff I think I know what your talking about.
I know I have one somewhere when I find it it's yours. Pete
__________________
'91 #1635 PoloGreen 350 LT5 11.09 @ 129.27 11.04 @ 128.86 474RWHP 400RWTQ http://www.youtube.com/watch?v=SFNFOhGGlR4 http://www.youtube.com/watch?v=ZlRIOMwaDYY https://sites.google.com/site/peteszr1garage |
04-21-2015 | #3 |
Join Date: Jul 2007
Location: Bartlett, IL
Posts: 7,137
|
Re: looking for harness brackets/clamps
Thanks Pete!!
We need to do pizza again soon
__________________
1990 Corvette ZR-1 #1051 Watson Headers (2" Primary) - 3" Magnaflow Bullet cats - LT4 Catback Late Model IH - Plenum Coilovers - 4.10s Custom Interior NCM Lifetime Member #978 |
04-22-2015 | #4 |
Join Date: May 2011
Location: Sydney, Australia
Posts: 2,479
|
Re: looking for harness brackets/clamps
We did a pizza nite two weeks ago.
__________________
Robert J. DeMarco [SIGPIC][/SIGPIC] [COLOR=blue]G[/COLOR][COLOR=red]rand[/COLOR] [COLOR=blue]S[/COLOR][COLOR=red]port[/COLOR] Registry Lifetime Member NCM Lifetime Member #2655 Pacecar Registry Member [COLOR=red]ZOOM Charter Member - ZR-1 Owners of Michigan[/COLOR] [COLOR=plum][I]ZR-1[/I] Registry member since 2012 [/COLOR] [COLOR=black]1990 LPE "368" Aerobody ZR-1, Last ZR-1 built by John[/COLOR] 1991 Callaway Aerobody ZR-1, DRM 500 1991 Shinoda Aerobody Spyder, 1998 Pace Car |
04-22-2015 | #5 |
Join Date: Jul 2007
Location: Bartlett, IL
Posts: 7,137
|
Re: looking for harness brackets/clamps
Why wasn't i invited?
__________________
1990 Corvette ZR-1 #1051 Watson Headers (2" Primary) - 3" Magnaflow Bullet cats - LT4 Catback Late Model IH - Plenum Coilovers - 4.10s Custom Interior NCM Lifetime Member #978 |
04-22-2015 | #6 |
Join Date: Oct 2004
Posts: 1,889
|
Re: looking for harness brackets/clamps
I would think that any purchase locally of an appropriate sized Adel clamp would do as well or better than anything removed from an original harness. The original harnesses most of the time had the retainer/strap or whatever taped right into the harness so it was in the correct location for attachment.
Google for "Adel clamp" should get you going. Nearly all of the Delphi conduit and harness hardware is here: http://catalog.delphi.com/connectors...,164483,165225 Many classes of hardware retainers. The very unusual shaped conduit clamps I've not seen in some time. They could very well be included in the Delphi document I linked. Last edited by WVZR-1; 04-22-2015 at 06:30 PM. |
|
|