ZR-1 Net Registry Forums

ZR-1 Net Registry Forums (http://zr1.net/forum/index.php)
-   C4 ZR-1 General Postings (http://zr1.net/forum/forumdisplay.php?f=14)
-   -   Vaccum solenoid switch (http://zr1.net/forum/showthread.php?t=31218)

whale 12-04-2019 03:03 PM

Vaccum solenoid switch
 
OK where do i get one of these......does the local auto parts store have them?

Paul Workman 12-04-2019 04:50 PM

Re: Vaccum solenoid switch
 
Check with Jerry @ Jerry's Gaskets.com is where I'd look first!;)

Young1 12-04-2019 10:33 PM

Re: Vaccum solenoid switch
 
AC Delco 214-358. Amazon or Rock Auto. I am waiting on one from Amazon right now to install this weekend. You do have to cut a spline out of the connector port and swap the bracket. The originals are no longer available.

Z51JEFF 12-04-2019 10:46 PM

Re: Vaccum solenoid switch
 
There are 2 types of the solenoid valves,the early type takes a small square foam filter and the later design takes a cylinder type filter. Does anybody know what type of filter this 214-358 takes,looks like the early design.

Dynomite 12-05-2019 06:25 AM

Re: Vaccum solenoid switch
 
Maybe four Solenoid Valves?

Vacuum Solenoid for early (90' under Plenum).
Vacuum Solenoid (filter) for Later (95' under Plenum)................Solenoid for Charcoal Canister (91'-95' under Plenum).
https://cimg3.ibsrv.net/gimg/www.cor...9407ac2631.jpghttps://cimg5.ibsrv.net/gimg/www.cor...7ebb645f89.jpg

Solenoid located on Charcoal Canister (not shown) under Drivers Headlight (90').

Young1 12-05-2019 07:04 AM

Re: Vaccum solenoid switch
 
214-358 has the square thin filter. The spring steel filter cover snaps on to either the early or late LT5 bracket. Easy peasy. I am doing a 93 MY right now. Test your replacement solenoid before install. I had a bad one that the plastic was malformed inside the nipples.

whale 12-05-2019 11:01 AM

Re: Vaccum solenoid switch
 
Thanks guys!!

Z51JEFF 12-05-2019 01:31 PM

Re: Vaccum solenoid switch
 
The filter for the switch is $13.00. This is for a piece of foam that is maybe 1/8 in thick and is 5/8 by 3/4 of an inch. When I went to the dealer to buy the cylinder shaped filter the parts guy ordered this one instead. I thought it was so absurd to charge $13.00 for such a small piece of foam I paid for it and kept it,shows how smart I am.

whale 12-07-2019 10:04 AM

Re: Vaccum solenoid switch
 
Just wondering......the OEM part has 3 vacuum ports and the replacement has 3 ports.....how do you make it work?

Z51JEFF 12-07-2019 10:17 AM

Re: Vaccum solenoid switch
 
Quote:

Originally Posted by whale (Post 301847)
Just wondering......the OEM part has 3 vacuum ports and the replacement has 3 ports.....how do you make it work?

The second switch with the silver nipple is the later design that takes the slip on filter.


All times are GMT -4. The time now is 08:46 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright ZR-1 Net Registry 2025