Quote:
Originally Posted by mike100
I saw the post with the 3.25" adapters- that was ridiculous, but for a functional spare (and not a drag skinny), A 1/2" adapter on a CTS wheel would be ok considering it is your only option- you'de just have to have the extras tool and hardware on hand to bolt it up if you needed the use of the donut.
|
On the rears that wouldn't be an issue. Have 18mm spacers now and rear brakes are currently stock. However, the fronts are problematic since I am using stock wheels studs. Would need to measure to see if there's enough meat on the stud for lug nut with 1/2" spacer.