View Single Post
Old 04-02-2013   #86
Dynomite
 
Dynomite's Avatar
 
Join Date: Aug 2009
Location: South Dakota/California
Posts: 3,817
Default Re: Plenum pull advice

Quote:
Originally Posted by mgbrv8 View Post
Hey guys i need a part number For the Square cross-section O-rings (The black one ) that goes between The compressor and the AC hose flange. All I can find are round ones The factory ring is 0.120" thick The aftermarket round cross section one is 0.140" thick. Any advice on what I should use. if I cant find it should the round ones be adequate?

Dave
Excellent question

Where do you find the green O rings?
I had the green O-rings on the evaporator connections but maybe the .120" thickness.



I dunno if this helps but there are a lot of AC O-ring kits on Ebay under the name Santech Industries.

Ebay Air-Conditioning-Seal-Repair-Kit

Last edited by Dynomite; 04-02-2013 at 11:40 PM.
Dynomite is offline   Reply With Quote