Plenum Pull Advice, Starter Rebuild, MAP Sensor Info

[Dynomite]

Originally Posted by mgbrv8

Hey guys i need a part number For the Square cross-section O-rings (The black one ) that goes between The compressor and the AC hose flange. All I can find are round ones The factory ring is 0.120" thick The aftermarket round cross section one is 0.140" thick. Any advice on what I should use. if I cant find it should the round ones be adequate?

Dave

Excellent question

Where do you find the green O rings?
I had the green O-rings on the evaporator connections but maybe the .120" thickness.



I dunno if this helps but there are a lot of AC O-ring kits on Ebay under the name Santech Industries.

Ebay Air-Conditioning-Seal-Repair-Kit