|
![]() |
#1 |
Join Date: Jul 2009
Location: Texas
Posts: 790
|
![]()
That is a great link Dynomite thanks for sharing. I have a basic question about our cylinder order is like the picture below?
Dave |
![]() |
![]() |
![]() |
#2 | |
![]() ![]() Join Date: Aug 2009
Location: South Dakota/California
Posts: 3,817
|
![]() Quote:
When number 1 is on compression, number 6 is on exhaust. Drivers Side from Front to Back.....1357 Passenger Side from Front to Back......2468
__________________
Clickable links ![]() On Iphone Touchable Links -Solutions- LT5 Modifications/Rebuild Tricks Low Mileage ZR-1 Restoration 1990 Corvette (L98) Modifications LT5 Eliminated Systems LT5 Added Systems LT5/ZR-1 Fluids 1995 LT5 SPECIFIC TOP END REBUILD TRICKS Last edited by Dynomite; 04-05-2013 at 11:48 PM. |
|
![]() |
![]() |
![]() |
#3 |
Join Date: Jul 2009
Location: Texas
Posts: 790
|
![]()
Okay I pulled my Plenum and install the new injectors. I also did the relay mod On the starter And neatly tucked everything in. I then pressure checked my 16 injectors And put voltage to them to Make sure they weren't stuck. And then I found out that one of my brand-new injectors are leaking. ARGH!!!!!
![]() This is why I like to do as much as I can myself because I can't trust others to do things right, Even assemble a brand new delpi injector. GRRR! Dave |
![]() |
![]() |
![]() |
|
|