Quote:
Originally Posted by Dynomite
I have a Whistler Wireless Inspection Camera 9mm Model IC-3709PX. The camera probe will fit easily into a spark plug port. With the piston at BDC you can actually place a bend in the camera probe cable and by rotating the camera probe cable can look at the side walls of the cylinder. The tops of the pistons can be visually inspected 360 deg.
One can insert the camera probe between the runners and above/below the fuel rail inspecting all sorts of items under the plenum. You can even watch the secondaries function as you like hot wiring Pin C17 with a Pin Probe as described by Marc Haibeck Secondary Operation without removing the Plenum |
Mine is Whistler WIC - 5000 - a step down from yours I think there Cliff, although cam is 9mm, so it should go through SP opening...
COuldn't be better, unless it had sleeve cables to 'steer' as it goes...
Quote:
Originally Posted by scottfab
I have one of those (different kind). Will the snake end of yours
fit down the spark plug hole? Mine wont' quite fit.
|
I got it AFTER putting in new plugs there Scott, after seein' mgbrv8 use it to diagnose gas problem in his rear end:
