Quote:
Originally Posted by fletchusmc
My FSM on page 5B2-6 says 166 +/- 15 lb.ft. This is the rear brake section but matches word for word the front brake caliper mounting bolt wording. Mine is also printed Dec 1994.
|
Oh! pg 5B2-10 has the correct specs.
The clue being that it says (verbatim from the front brake procedure) to tighten the 'two front caliper mounting bolts'. Brakes are so straight forward, I never would have read that anyhow- just go to the last page for the torques and that's that.