|
|
|
02-11-2014
|
#1 |
 Join Date: Nov 2013
Location: Jacksonville, NC
Posts: 48
|
Re: Pretty cool find
My FSM on page 5B2-6 says 166 +/- 15 lb.ft. This is the rear brake section but matches word for word the front brake caliper mounting bolt wording. Mine is also printed Dec 1994.
|
|
|
|
02-11-2014
|
#2 | |
 Join Date: Feb 2011
Location: San Marcos CA
Posts: 1,786
|
Re: Pretty cool find
Quote:
The clue being that it says (verbatim from the front brake procedure) to tighten the 'two front caliper mounting bolts'. Brakes are so straight forward, I never would have read that anyhow- just go to the last page for the torques and that's that. |
|
|
|
|
|
02-12-2014
|
#3 |
|
Join Date: May 2007
Location: Chicagoland, IL
Posts: 9,686
|
Re: Pretty cool find
Well I'll be doing this very shortly w C6Z06 rear calipers. Need to check if the torque spec is the same. My 1/2" torque wrench only goes to 150lbs.
|
|
|
|
 |
|
|
Hybrid Mode
