Quote:
Originally Posted by Locobob
Thanks Jerry! This is sounding like a very feasible scenario. The cams are stock. Sounds like there are differing opinions on the size of the plugs though? Can we get a consensus on the size of the plugs? Anybody have one they can actually put a caliper to? or any other plug in that area that could conceivably make its way down one of those 4 passages from the cylinder head? Judging by the pics of the windage tray and Marks input regarding clearances as well as the fact that the crank plug I bought doesn't match the plug I found I think we can discount the idea that it came from the crank.
|
I measured diameter of plug across end of cam.
I also found one more source of the Camshaft Plug Diameter in "Solutions".
See Post #26.........
Camshaft plugs
Sent from my iPhone using
ZR-1 Net Registry