Eck's 'Coating Spray' (for header wrapping)... - ZR-1 Net Registry Forums

Schrade · 03-11-2014

OBX's are about to see the heads here.

In the 'library' this AM, I saw wrap in Eckler's catalogue pimped with 'Coating Spray'.

Anyone know ANYthing about this stuff?

I thought at first it was some adhesive starter. THought about calling, but prefer opinions from anyone who's not necessarily selling...

I'm guessing no one knows anything about it, but if wrong, that's fine with me here...........................................

scottfab · 03-11-2014

Is this it?
http://www.ecklerscorvette.com/diamo...ray-paint.html

Schrade · 03-11-2014

Quote:

Originally Posted by scottfab

Is this it?
http://www.ecklerscorvette.com/diamo...ray-paint.html

No - I don't think that's it there Scott; looks like this one is it.

Need info from users, if any - not sellers... (OR ANY COMPARABLE BRANDED PRODUCT).

scottfab · 03-11-2014

Quote:

Originally Posted by Schrade

No - I don't think that's it there Scott; looks like this one is it
...snip..

Oh I see. Must be similar to this one at Home Depot for $7.98
Both are automotive and both 2000deg.

http://www.homedepot.com/p/Rust-Oleu...8903/202623076

Karl · 03-11-2014

Can you even paint stainless steel? That's what the obx headers are made from. I had mine coated locally. I will post some pictures as mine are going on along with a top end port job which should be done in about a month.

If you look at the second picture the egr tube is only about 1/3 coated as I plan on cutting it down some and capping it off before the install. There is a minor "rise" where the coating is. You can feel and see the difference.

03-11-2014	#1
Schrade Join Date: Dec 2012 Location: NC Posts: 1,783	Eck's 'Coating Spray' (for header wrapping)... OBX's are about to see the heads here. In the 'library' this AM, I saw wrap in Eckler's catalogue pimped with 'Coating Spray'. Anyone know ANYthing about this stuff? I thought at first it was some adhesive starter. THought about calling, but prefer opinions from anyone who's not necessarily selling... I'm guessing no one knows anything about it, but if wrong, that's fine with me here...........................................

03-11-2014	#2
scottfab Join Date: Jan 2009 Location: Portland Oregon metro area (Washington side) Posts: 3,193	Re: Eck's 'Coating Spray' (for header wrapping)... Is this it? http://www.ecklerscorvette.com/diamo...ray-paint.html __________________ Scott Vett owner since 1979._It's about the car and the people

03-11-2014	#5
Karl Join Date: May 2013 Location: Chicago Posts: 982	Re: Eck's 'Coating Spray' (for header wrapping)... Can you even paint stainless steel? That's what the obx headers are made from. I had mine coated locally. I will post some pictures as mine are going on along with a top end port job which should be done in about a month. If you look at the second picture the egr tube is only about 1/3 coated as I plan on cutting it down some and capping it off before the install. There is a minor "rise" where the coating is. You can feel and see the difference. Last edited by Karl; 03-11-2014 at 10:17 PM.