Interior project - Page 2 - ZR-1 Net Registry Forums

11-30-2009

Quote:

Originally Posted by dbriana

When you took out the dash did you see where the heater mix door/actuator is? Mine needs replacing and told the dash has to be dropped. If you saw it where in the third pic would it be and would it have to be totally dropped? Thanks

It's over on the far right hand side close to the door. You can't even see it in the third picture. I'll look later today underneath and grab some shots for you.

Quote:

Originally Posted by Rhipsher

Man Jeff even you've got an upgraded stereo from stock. I'm torn between keeping the stereo stock and having a stereo system that can punch you in the chest.

I had the sound system done when I first got the car. It's nothing that is thumping, but I can hear the music with the top off or the windows down, and I have a lot of functionality with it. My headunit and a couple of amps were dead when I got the car.

Quote:

Originally Posted by LGAFF

Heat barriers, sound deadening materials....wow you guys are getting soft......time for a C6.

I would love a Z06. My big thing is I am driving to BG next May, so I want to be able to make the drive with out going crazy. Hell, I'm even adding AC back into the car

rhipsher · 11-30-2009

Speaking of stereos. Everything worked in the car when I got it. No popping noise or RPM related noises. Very clean sounding. Tape deck cd player works just perfect. But I do notice that when the stereo is on and I slow down for a light that the stereo volume lowers itself slightly. Then when I start rolling again it goes back up to where it was. It's not a big deal to me but I was just wondering if anybody else has noticed the same thing.

gbrtng · 11-30-2009

It's called speed controlled volume - the control is concentric with the volume control.
Learn something every day.

rhipsher · 11-30-2009

Actually thats pretty damn cool Glenn. I was wondering if it was designed that way.

11-30-2009

Started in 90. There are three settings.

Off
Low
High

It's on the same knob as the volume.

vettn71 · 11-30-2009

Jeff

Do you just not having anything esle to do? Very nice job, BTW. Carpet looks great!

Jim

11-30-2009

Quote:

Originally Posted by vettn71

Jeff

Do you just not having anything esle to do? Very nice job, BTW. Carpet looks great!

Jim

Got too much to do, which is why this project still isn't done. Got another pooched 368 that might be showing up on my doorstep soon.

Hammer · 11-30-2009

Jeff, been there done that on a 69 El Camino, SS396. Course it's nothing like what the Z is, but still a big project.

Nice job, looking good.

-=Jeff=- · 11-30-2009

That's nothing

11-30-2009

Jeff,

Looks great and I know what you mean about one thing let to another. Good choice on the insulation material and much better than that cheap stuff I bought from the Cowboy dude on the other forum; I am some regrets on all the work to put it in.

11-30-2009	#12
rhipsher Join Date: Aug 2008 Location: Houston, TX Posts: 2,314	Re: Interior project Speaking of stereos. Everything worked in the car when I got it. No popping noise or RPM related noises. Very clean sounding. Tape deck cd player works just perfect. But I do notice that when the stereo is on and I slow down for a light that the stereo volume lowers itself slightly. Then when I start rolling again it goes back up to where it was. It's not a big deal to me but I was just wondering if anybody else has noticed the same thing.

11-30-2009	#13
gbrtng Join Date: Feb 2006 Location: San Antonio area Posts: 1,183	Re: Interior project It's called speed controlled volume - the control is concentric with the volume control. Learn something every day. __________________ “Buy the best example of what you want, and pay whatever it takes. That way, you cry only once.” ~ Bruce Meyer

11-30-2009	#14
rhipsher Join Date: Aug 2008 Location: Houston, TX Posts: 2,314	Re: Interior project Actually thats pretty damn cool Glenn. I was wondering if it was designed that way.

11-30-2009	#15
Jeffvette Guest Posts: n/a	Re: Interior project Started in 90. There are three settings. Off Low High It's on the same knob as the volume.

11-30-2009	#16
vettn71 Join Date: Oct 2008 Location: Colleyville, TX Posts: 272	Re: Interior project Jeff Do you just not having anything esle to do? Very nice job, BTW. Carpet looks great! Jim

11-30-2009	#18
Hammer Join Date: Apr 2006 Location: Ideho Posts: 2,647	Re: Interior project Jeff, been there done that on a 69 El Camino, SS396. Course it's nothing like what the Z is, but still a big project. Nice job, looking good.

11-30-2009	#19
-=Jeff=- Join Date: Jul 2007 Location: Bartlett, IL Posts: 7,168	Re: Interior project That's nothing __________________ 1990 Corvette ZR-1 #1051 Watson Headers (2" Primary) - Flowmaster Cats - Borla Catback Late Model IH - Plenum Coilovers - 4.10s Shelby Series 1 - Wilwood Brakes Custom Interior NCM Lifetime Member #978

11-30-2009	#20
HAWAIIZR-1 Guest Posts: n/a	Re: Interior project Jeff, Looks great and I know what you mean about one thing let to another. Good choice on the insulation material and much better than that cheap stuff I bought from the Cowboy dude on the other forum; I am some regrets on all the work to put it in.