Update on my hi-miler Z project - Page 8 - ZR-1 Net Registry Forums

VetteMed · 02-26-2011

Quote:

Originally Posted by GOLDCYLON

Glad you pulled the Heater Core I just did mine last year. Wow that is a total tear out are you going with the dynmat or did you get one of those crazy cowbody kits over on the corvette forum?

I'm going with RAAMMAT and Ensolite, from Rick of RAAMAudio over on the other forum. He's got a great reputation and really knows his stuff. I had the crazycowboy kit in the red car, and I wasn't all that impressed by it. Maybe my expectations were too high, given that it's just foil-backed bubble wrap

GOLDCYLON · 02-26-2011

Quote:

Originally Posted by VetteMed

I'm going with RAAMMAT and Ensolite, from Rick of RAAMAudio over on the other forum. He's got a great reputation and really knows his stuff. I had the crazycowboy kit in the red car, and I wasn't all that impressed by it. Maybe my expectations were too high, given that it's just foil-backed bubble wrap

That what I heard as well "Bubble wrap". Pleae post up what you think of this new stuff. Ive been thinking about this when I get the carpets changed out. I still need to find a rear black carpet. I have all the front already I bought from Sgreg a while back. GC

GOLDCYLON · 02-26-2011

Quote:

Originally Posted by VetteMed

Daryll, the shift light has 3 wires - 12V+, Ground, and tach feed. I had this same shift light in my red '91, and I tapped into the white wire that's located in the bundle with the white dead-end connector seen here:

I think I set it for 6600 when I installed it in the red car.

Was that connector provided with the kit? What color light did you go with?

VetteMed · 02-26-2011

Quote:

Originally Posted by GOLDCYLON

Was that connector provided with the kit? What color light did you go with?

That connector is taped to your main wiring harness near the brake booster. I'm not sure of it's purpose, since it's a dead-end.

I'm embarrassed to admit that I don't remember if I ordered red or amber, it's been so long since I've seen it in use

GOLDCYLON · 02-26-2011

Quote:

Originally Posted by VetteMed

That connector is taped to your main wiring harness near the brake booster. I'm not sure of it's purpose, since it's a dead-end.

I'm embarrassed to admit that I don't remember if I ordered red or amber, it's been so long since I've seen it in use

LOL well its not like you have ANYTHING else on your mind Andrew. Im impressed its looking great!!!

VetteMed · 02-26-2011

I couldn't stand the suspense, I had to go plug the headunit in to see what it looked like when illuminated. The unit is an Alpine CDA-W925EHI. It's an asian and australian unit, I got it from Malaysia. I wanted something that looked like it belongs in the car. I like the DVD units but I don't like touchscreens. SO we'll see how this goes.

GOLDCYLON · 02-26-2011

Quote:

Originally Posted by VetteMed

I couldn't stand the suspense, I had to go plug the headunit in to see what it looked like when illuminated. The unit is an Alpine CDA-W925EHI. It's an asian and australian unit, I got it from Malaysia. I wanted something that looked like it belongs in the car. I like the DVD units but I don't like touchscreens. SO we'll see how this goes.

Amber double DIN you cant go wrong.

tomtom72 · 02-27-2011

That connector that is taped to the harness is the test port for the DIS system. That is the back probe point and the place where the adapter from a TECH 1A plugs into to run ignition simulations & read system performance and check for grounded & or open circuits. Of course that software is optional & hard to find.

I would like to thank you very much for taking the time to post up the heater core r&r.

......

I keep dreaming that I will never have to do this job.....

GOLDCYLON · 02-28-2011

Ordered my New two stage Raptor light in Amber. Im stealing your install suggestion Andrew lol.
This is going to be installed by the ZFDOC which I think is the best person I can think of to detrmine the shift points. I have ask him to record the shift points so I can pass them on to the community. Car is already over there while in LA for the RH tensioner upgrade.

XfireZ51 · 02-28-2011

I bought a new connector for this and pinned the Raptor wires to it. That way I can plug and unplug the shift light anytime I want. I also ground it using the MAP sensor plenum bolt.

Quote:

Originally Posted by VetteMed

Daryll, the shift light has 3 wires - 12V+, Ground, and tach feed. I had this same shift light in my red '91, and I tapped into the white wire that's located in the bundle with the white dead-end connector seen here:

I think I set it for 6600 when I installed it in the red car.

02-26-2011	#76
VetteMed Join Date: Mar 2009 Location: Orlando, FL Posts: 1,816	Re: Update on my hi-miler Z project I couldn't stand the suspense, I had to go plug the headunit in to see what it looked like when illuminated. The unit is an Alpine CDA-W925EHI. It's an asian and australian unit, I got it from Malaysia. I wanted something that looked like it belongs in the car. I like the DVD units but I don't like touchscreens. SO we'll see how this goes.

02-27-2011	#78
tomtom72 Join Date: Dec 2004 Location: Jacksonville, FL USA Posts: 4,609	Re: Update on my hi-miler Z project That connector that is taped to the harness is the test port for the DIS system. That is the back probe point and the place where the adapter from a TECH 1A plugs into to run ignition simulations & read system performance and check for grounded & or open circuits. Of course that software is optional & hard to find. I would like to thank you very much for taking the time to post up the heater core r&r. ...... I keep dreaming that I will never have to do this job..... __________________ 1990 ZR-1, Black/grey, #2233, stock. ZR-1 Net Reg Founding Member #316 & NCM member

02-28-2011	#79
GOLDCYLON Join Date: May 2007 Location: Peoria, AZ Posts: 9,120	Re: Update on my hi-miler Z project Ordered my New two stage Raptor light in Amber. Im stealing your install suggestion Andrew lol. This is going to be installed by the ZFDOC which I think is the best person I can think of to detrmine the shift points. I have ask him to record the shift points so I can pass them on to the community. Car is already over there while in LA for the RH tensioner upgrade. __________________ GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director 91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V Last edited by GOLDCYLON; 02-28-2011 at 01:51 PM.