Need Help no running ZR1 - ZR-1 Net Registry Forums

tomtom72 · 05-05-2011

I put the main connector, the longest or largest connector, at the back face of the ignition box on upside down and bent one of the pins and I had to pull the plenum to straighten out the pin!

Only thing was I had ignition function. The system went into some kind of limp home mode. The motor would start & run but it sent a code 41 (?). I would have to say maybe one of the small plugs at the front of the ignition box maybe the issue here?

Tom

05-05-2011	#12
tomtom72 Join Date: Dec 2004 Location: Jacksonville, FL USA Posts: 4,609	Re: Need Help no running ZR1 I put the main connector, the longest or largest connector, at the back face of the ignition box on upside down and bent one of the pins and I had to pull the plenum to straighten out the pin! Only thing was I had ignition function. The system went into some kind of limp home mode. The motor would start & run but it sent a code 41 (?). I would have to say maybe one of the small plugs at the front of the ignition box maybe the issue here? Tom __________________ 1990 ZR-1, Black/grey, #2233, stock. ZR-1 Net Reg Founding Member #316 & NCM member