|
|
|
05-19-2011
|
#1 |
|
Join Date: May 2004
Location: Finland
Posts: 123
|
Re: Fidanzza flywheel and transmission 10W60 oil?
I guess that biggest problem is at highway at cruise maybe 50mph and little uphill comes.. That sound isnt so nice.. So maybe I should get Castrol 10W60 next time if it makes difference to normal GM oil that is used with ZF.
|
|
|
|
05-19-2011
|
#2 | |
 
Join Date: Nov 2007
Location: Squires (near Ava MO in the Mark Twain N'tl Forest) - Missouri
Posts: 6,466
|
Re: Fidanzza flywheel and transmission 10W60 oil?
Quote:
 ? That doesn't sound so good, and I doubt it has anything to do with the Fidanza under the conditions you describe... Something else is going on there, I guess. I would suggest linking up with Bill B at ZFdoc.comP. |
|
|
|
|
|
05-19-2011
|
#3 |
|
Join Date: May 2004
Location: Finland
Posts: 123
|
Re: Fidanzza flywheel and transmission 10W60 oil?
This started just after Fidanza years ago and I think I have read that single mass flywheel does this with low RPM when there gets more load..
 ?There will also be some low level growl from the transmission when accelerating lightly in the 750 to 2500 rpm range.? http://www.zr1specialist.com/HAT%20W...eel-clutch.htm Last edited by Mika73; 05-19-2011 at 07:34 AM. |
|
|
|
|
05-19-2011
|
#4 | |
 
Join Date: May 2007
Location: Peoria, AZ
Posts: 9,119
|
Re: Fidanzza flywheel and transmission 10W60 oil?
Quote:
I completely agree with Pauls statement above. Something else is going on and you need to talk to Bill Boudreau. I also just recently learned that the Fridanza flywheels are not good to go right out of the box. They need to be drilled and Zero balanced before installation. Im getting ready to install one on my new motor and Polo-1 is getting mine zero balanced. Just FYI
__________________
GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director  91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V |
|
|
|
|
|
05-19-2011
|
#5 |
|
Join Date: May 2004
Location: Finland
Posts: 123
|
Re: Fidanzza flywheel and transmission 10W60 oil?
Maybe I was using wrong word. But it makes noise that disturbs me at highway. It isnt drilled/balanced, service just put it there when they changed Centerforce clutch. Problem is at low rpm and goes away if using lower gear.
|
|
|
|
|
05-19-2011
|
#6 |
|
Join Date: Nov 2007
Location: Squires (near Ava MO in the Mark Twain N'tl Forest) - Missouri
Posts: 6,466
|
Re: Fidanzza flywheel and transmission 10W60 oil?
Something else...
When the transmission is installed, the alignment of the transmission has to be correct, or there can be some noise (and wear and vibration) issues. (Again, visit ZFdoc.com for the specific information. Just a thought.) P. |
|
|
|
|
05-19-2011
|
#7 |
 
Join Date: Mar 2004
Location: Found Member
Posts: 4,327
|
Re: Fidanzza flywheel and transmission 10W60 oil?
Bear in mind that the transmission will "growl" loudly with a single mass on the highway when your lugging the engine.
This is my experience at least. |
|
|
|
|
05-19-2011
|
#8 | |
|
Join Date: Dec 2006
Location: Montana
Posts: 64
|
Re: Fidanzza flywheel and transmission 10W60 oil?
Quote:
|
|
|
|
|
|
05-20-2011
|
#9 |
|
Join Date: May 2004
Location: Finland
Posts: 123
|
Re: Fidanzza flywheel and transmission 10W60 oil?
Thats good to know. That sound just isnt so nice. Usually helps if rev higher, but problem is worse with cruise that try keep speed something like 50mph or at slow city stop/go traffic.
And 10W60 wont help to this? It helps only at idle? Last edited by Mika73; 05-20-2011 at 03:21 AM. |
|
|
|
 |
|
|
Hybrid Mode
