ZR-1 Net Registry Forums  

Go Back   ZR-1 Net Registry Forums > C4 ZR-1 > C4 ZR-1 General Postings

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 03-05-2012   #10
VetteMed
 
Join Date: Mar 2009
Location: Orlando, FL
Posts: 1,816
Default Re: Update on my hi-miler Z project

OK, looks like the engine is running at the correct temperature. The halfway point on the dash gauge is roughly equivalent to about 85 C, and the 100 C point (212F) is about 3/4 up. So it looks like the temps are where they ought to be, and the problem is that the temp sensor is calibrated differently than stock.

I'll probably live with it for now, if it's still bugging me the next time I have to pull the plenum, I'll swap it out with an OEM sensor.

Everything is running great, still a bit rough idle from time to time, but very smooth and quiet otherwise. The smooth motor, and the fresh clutch and hydraulics really have made the car feel like new.
VetteMed is offline   Reply With Quote
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 07:08 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright ZR-1 Net Registry 2025