|
![]() |
#1 |
![]() Join Date: Dec 2004
Location: Jacksonville, FL USA
Posts: 4,609
|
![]()
They proly do that to confuse us!
Oh, I made a mis-type/brain fart on the rebuilding kit. The box has a Raybestos label on it and the contents are in a sealed plastic bag with a PBR instruction sheet in the sealed bag....I guess it's a good thing that this stuff is made by some one reputable....better than the clutch hydraulics! ![]() Tom
__________________
1990 ZR-1, Black/grey, #2233, stock. ZR-1 Net Reg Founding Member #316 & NCM member |
![]() |
![]() |
![]() |
#2 | |
Join Date: Jan 2004
Location: Southern CA
Posts: 108
|
![]() Quote:
The dust boot on the end of the cylinder will have Girling molded into the surface if it is a Lucas Girling cylinder and also if you take the cap off the clutch master cylinder and look down at the bottom flat of the moisture barrier it will have Girling molded into it if the master cylinder was made by Lucas Girling. |
|
![]() |
![]() |
![]() |
|
|