![]() |
#31 |
![]() Join Date: Nov 2007
Location: Squires (near Ava MO in the Mark Twain N'tl Forest) - Missouri
Posts: 6,466
|
![]()
Prolly not too much.
Perhaps open the TB to 63mm, and fuss with an idea I have for smoothing the air flow through the air horn. Some cosmetic things on the interior that need to be done; saggin headliner, re-cover the speakers at the kick panels, stuff like that. I thought about installing an electric water pump. But, after seeing what happended to Pete after his failed...I'm not so sure anymore. (We briefly grazed the topic of some pump failure sensors, but (I) haven't discussed it beyond that.) Then just yesterday, while "blowing out some cobwebs", the GM spring clamp on my right side coolant pipe allowed the hose to slip off of the pipe. When I noticed the fog behind me, the temp was already climbing, and got oh so close to that hashed line area at the top end of the temp scale before I could pull off the highway. Now I'm praying I didn't hurt it! So, this being the second time I've had coolant issues at WOT, the thought again returns to the electric pump. However, I wouldn't install it w/o some redundant monitoring scheme (prolly a combination of electrical and temperature sensing). We'll see. P. |
![]() |
![]() |
![]() |
#32 |
Join Date: May 2007
Location: Chicagoland, IL
Posts: 9,686
|
![]()
Maybe you should get better hose clamps. Sounds like your spring clamp has sprung somewhat.
|
![]() |
![]() |
![]() |
#33 | |
![]() ![]() Join Date: May 2007
Location: Peoria, AZ
Posts: 9,119
|
![]() Quote:
Paul upgrade to Samcos and get those Samco stainless clamps. Get rid of those Dorman style ring clamps. Did the check Guages light come on? GC
__________________
GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director ![]() 91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V |
|
![]() |
![]() |
![]() |
#34 |
Join Date: Aug 2009
Location: Hamilton, Va.
Posts: 113
|
![]()
Coilovers will be installed over the winter. I cannot say I am looking forward to this project but I am looking forward to the results after installation. I did this on my race car a LONG time ago and I still have not forgot what a pain in the *** this is but it will be worth it. I just love the looks of a ZR-1 dropped to an agressive ride height. Good luck to all with their projects. I hope we have lots of pics and stories this soring.
|
![]() |
![]() |
![]() |
#35 |
![]() ![]() Join Date: Feb 2010
Location: Pendleton, IN
Posts: 3,899
|
![]()
Winter Wish List
* Radio with Navigation, etc. * 345x40x17's * Interior colored roll bar padding (tan)
__________________
1988 KOH Prototype EX5023 sold 1990 ZR-1 #444 Convertible 1990 ZR-1 Black #966 1991 ZR-1 Quazar Blue #296 1957 Duntov SS Project |
![]() |
![]() |
![]() |
#36 |
![]() Join Date: Nov 2007
Location: Squires (near Ava MO in the Mark Twain N'tl Forest) - Missouri
Posts: 6,466
|
![]() |
![]() |
![]() |
![]() |
#37 |
Join Date: May 2007
Location: Chicagoland, IL
Posts: 9,686
|
![]() |
![]() |
![]() |
![]() |
#38 |
![]() Join Date: Nov 2007
Location: Squires (near Ava MO in the Mark Twain N'tl Forest) - Missouri
Posts: 6,466
|
![]() |
![]() |
![]() |
![]() |
#39 | |
![]() Join Date: Dec 2003
Location: Chicagoland,IL
Posts: 2,667
|
![]() Quote:
Pete
__________________
'91 #1635 PoloGreen 350 LT5 11.09 @ 129.27 11.04 @ 128.86 474RWHP 400RWTQ http://www.youtube.com/watch?v=SFNFOhGGlR4 http://www.youtube.com/watch?v=ZlRIOMwaDYY https://sites.google.com/site/peteszr1garage |
|
![]() |
![]() |
![]() |
#40 |
![]() Join Date: Feb 2011
Location: San Marcos CA
Posts: 1,786
|
![]()
I can tell you that if you are a needle width from the red zone on the temp gauge, that's about 235 degrees F on as reported by the tech1.
|
![]() |
![]() |
![]() |
|
|