LATEST PROJECT APSIS Carbon Fiber - Page 2 - ZR-1 Net Registry Forums

ghlkal · 01-25-2013

Quote:

Originally Posted by GOLDCYLON

I paid extra to have the Orange Lettering redone and triple clear coated over the carbon fiber.

Now that's awesome.

Not that I can afford this anyway, but not having the lettering on there was a negative to me. I might have to save up my pennies now ...

Having CF with the lettering is

XfireZ51 · 01-25-2013

I have a 92 and have been thinking of refinishing with plastic dip to resemble the original finish

GOLDCYLON · 01-25-2013

Quote:

Originally Posted by USAFPILOT

is that actual carbon fiber now or some kind of lamination?

Actual CF

GOLDCYLON · 01-25-2013

Quote:

Originally Posted by XfireZ51

GC,

Is this using your own console parts or new?

All new with exception of radio surround

I provided ALL the parts from my private stock.

All dash vents
The defroster vent
Radio surround mine was modified to fit my radio so a NEW one would be a NOGO
Console Shifter bezel
Headlights switch
Drivers door bezel long piece

ScottZ95ZR1 · 01-25-2013

Very nice Daryll !

GOLDCYLON · 01-26-2013

Thanks fellars it was a two month turnaround. However i can't wait to see it all come.together. I think retaining the lettering is what sets this apart. From what I see so far I.am really pleased.

GOLDCYLON · 01-26-2013

Quote:

Originally Posted by GOLDCYLON

Thanks fellars it was a two month turnaround. However i can't wait to see it all come.together. I think retaining the lettering is what sets this apart. From what I see so far I.am really pleased.

I may get the steering wheel re wrapped in leather and do the half cf on it as well I.really wanted to update the interior a little. Well now a lot. I took a gamble going first.

USAFPILOT · 01-26-2013

did you have to send off your parts so they could make a mold or something? Will they now just sell the parts?

WVZR-1 · 01-26-2013

Quote:

Originally Posted by GOLDCYLON

I may get the steering wheel re wrapped in leather and do the half cf on it as well I.really wanted to update the interior a little. Well now a lot. I took a gamble going first.

I believe I saw you buy a steering wheel the other day for a '90MY. I thought nothing of it but if this is intended for your project it's maybe a "no go" with the '91MY air bag. The coil is different and the slot for the coil in the wheel is different, I'm quite sure. If you had an air-bag deployment with a '90 you needed to use a '91 air-bag, steering wheel and coil kit. Check it closely before you send it!! I have a quite nice wheel if it's a no go! I might be able to do a snapshot of both, I believe I still have a '90 also. Don't know I'd need to look.
LMK!

[IMG]

[/IMG][IMG]

[/IMG]

GC - '91MY on the left/top and '90MY on the right/bottom. It appears that the '90MY could be modified to do a '91MY and that the '91MY could do a '90MY. Another one of those "backward" only compatible pieces.

alwayscode390 · 01-26-2013

BEAUTIFUL setup , congrats

---

01-25-2013	#12
XfireZ51 Join Date: May 2007 Location: Chicagoland, IL Posts: 9,686	Re: LATEST PROJECT APSIS Carbon Fiber I have a 92 and have been thinking of refinishing with plastic dip to resemble the original finish

01-25-2013	#15
ScottZ95ZR1 Join Date: Mar 2008 Location: Pendleton, IN Posts: 674	Re: LATEST PROJECT APSIS Carbon Fiber Very nice Daryll !

01-26-2013	#16
GOLDCYLON Join Date: May 2007 Location: Peoria, AZ Posts: 9,120	Re: LATEST PROJECT APSIS Carbon Fiber Thanks fellars it was a two month turnaround. However i can't wait to see it all come.together. I think retaining the lettering is what sets this apart. From what I see so far I.am really pleased. __________________ GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director 91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V

01-26-2013	#18
USAFPILOT Join Date: Aug 2007 Location: Spring TX Posts: 1,341	Re: LATEST PROJECT APSIS Carbon Fiber did you have to send off your parts so they could make a mold or something? Will they now just sell the parts?

01-26-2013	#20
alwayscode390 Join Date: Dec 2012 Location: STL Posts: 492	Re: LATEST PROJECT APSIS Carbon Fiber BEAUTIFUL setup , congrats ---