anyone know where to get vacuum lines for the Z

[zr-1assassin]

NEED THE VACUUM LINE THAT CROSSES OVER THE MOTOR FROM DRIVERS SIDE PLENUM TO PASS. SIDE PUMP AT THE FRONT OF THE CAR. ANYONE KNOW WHERE TO GET THESE. CHECKED ECKLERS,MID-AMERICA AND CORVETTE CENTRAL, COULDNT FIND ANY. THERE IS A KIT ON EBAY FOR $300.00 BUT ALL I NEED IS THE ONE.

www.whiteracingproducts.com

[Z Factor]

In addition to the source posted, you can contact P & G. They can normally get what you need at reasonable prices, certainly better than the dealer. Their number is 1.888.870.0280 x214

https://www.partszoneonline.com/index.php

[hpbadger]

I will be checking these sources myself as I broke a vacuum line yesterday

Anybody have any luck patching up broken plastic lines? fobs? tape?

[tccrab]

Originally Posted by hpbadger

I will be checking these sources myself as I broke a vacuum line yesterday

Anybody have any luck patching up broken plastic lines? fobs? tape?

The "plastic" tubing itself is a semi-rigid nylon tubing that's available from Legris. I can't remember the exact size (3mm ???), but it's metric.
Here's a link to their website:
http://www.legris.com/legris_com/Vis...BM&gr=09&fa=01
You can buy similar tubing from most any Pneumatic supply house. Look in the yellow pages under Pneumatic.

TomC
'90ZR1 #792

[hpbadger]

Originally Posted by tccrab

The "plastic" tubing itself is a semi-rigid nylon tubing that's available from Legris. I can't remember the exact size (3mm ???), but it's metric.
Here's a link to their website:
http://www.legris.com/legris_com/Vis...BM&gr=09&fa=01
You can buy similar tubing from most any Pneumatic supply house. Look in the yellow pages under Pneumatic.

TomC
'90ZR1 #792

Thanks!

hpb