Plenum Pull Advice, Starter Rebuild, MAP Sensor Info

[mgbrv8]

Originally Posted by A26B

The one you are referring to, under the ECM (later moved to underside of plenum, forward of DIS Module) is an MDP Sensor, Manifold Differential Pressure. They look alike, but are not interchangeable. In fact, the harness plugs will not interchange, i.e. you cannot plug a MAP sensor at the MDP location nor an MDP sensor at the MAP location.

We stock both sensors. If you want to see them, go to the web store & search by the PN's.

You can tell them apart visually if you know what to look for.

Jerry thank you, in your professional opinion Jerry should the oily map be changed out or should it be fine? Also is this normal to get oil up there or is this caused by another problem in the system? The engine has 80k great compression and no blow by.

Also thank you Jerry for gettin the fuel systems orings to my door so quickly.

Dave