Exhaust Manifold Stud Oil Leak - ZR-1 Net Registry Forums

Cal55 · 07-28-2013

Quote:

Originally Posted by 1991ZR1

I don't remember which, but it was either an open end wrench or a short adjustable wrench. Most likely it as the open end wrench for the leverage at least to get it loose.

Thanks, I guess I'll have to put another nut on the stud to lock the other one in place to remove the stud. If anyone has any tricks or suggestions in doing this I'd appreciate hearing them.
Joe

LGAFF · 07-28-2013

Sometimes if you are lucky the stud will back out when you turn the nut....I was not so lucky...be patient.

Cal55 · 07-28-2013

Quote:

Originally Posted by LGAFF

Sometimes if you are lucky the stud will back out when you turn the nut....I was not so lucky...be patient.

That would be nice! I didn't work on it today, hopefully next weekend. Thanks for the reply!
Joe

07-28-2013	#2
LGAFF Join Date: Mar 2007 Location: Crystal Lake, IL Posts: 7,180	Re: Exhaust Manifold Stud Oil Leak Sometimes if you are lucky the stud will back out when you turn the nut....I was not so lucky...be patient. __________________ LGAFF 90 #966-150K miles-sold 92 #234-sold 1987 Callaway TT #17 1991 ZR-1 #1359